| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. |
| Red Hat Product Security has come to the conclusion that this CVE is false due to upstream security policy. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/list_lru: drain before clearing xarray entry on reparent
memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL. |
| A flaw was found in libssh. If data packets are processed after a channel is closed, channel data callbacks can be invoked after the associated data has already been freed, leading to crashes or possible use-after-free conditions. |
| A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service. |
| A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior. |
| A flaw was found in libssh. When ProxyCommand is used, an unchecked fork() failure can be stored as process ID -1; during cleanup, signals may then be sent across the caller's accessible process tree, leading to local denial of service. |
| A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In ISC BIND9 versions BIND 9.11.14 -> 9.11.19, BIND 9.14.9 -> 9.14.12, BIND 9.16.0 -> 9.16.3, BIND Supported Preview Edition 9.11.14-S1 -> 9.11.19-S1: Unless a nameserver is providing authoritative service for one or more zones and at least one zone contains an empty non-terminal entry containing an asterisk ("*") character, this defect cannot be encountered. A would-be attacker who is allowed to change zone content could theoretically introduce such a record in order to exploit this condition to cause denial of service, though we consider the use of this vector unlikely because any such attack would require a significant privilege level and be easily traceable. |
| By flooding the target resolver with queries exploiting this flaw an attacker can significantly impair the resolver's performance, effectively denying legitimate clients access to the DNS resolution service. |
| By spoofing the target resolver with responses that have a malformed EdDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources. |
| By spoofing the target resolver with responses that have a malformed ECDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources. |
| "managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is possible for a BIND server which uses managed-keys to exit due to an assertion failure if, during key rollover, a trust anchor's keys are replaced with keys which use an unsupported algorithm. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5745. |
| A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat. |
| A flaw was found in Podman. The podman machine init command fails to verify the TLS certificate when downloading the VM images from an OCI registry. This issue results in a Man In The Middle attack. |
| A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond
the bounds of a heap-allocated buffer when processing crafted TDSC cursor
data. A remote attacker could exploit this by supplying a specially crafted
video file, potentially leading to a denial of service or arbitrary code
execution. |
| JavaScript Cookie is a JavaScript API for handling cookies, client-side. Prior to version 3.0.7, js-cookie's internal assign() helper copies properties with for...in + plain assignment. When the source object is produced by JSON.parse, the JSON object's "__proto__" member is an own enumerable property, so the for…in enumerates it and the target[key] = source[key] write triggers the Object.prototype.__proto__ setter on the fresh target ({}). The result is a per-instance prototype hijack: Object.prototype itself is untouched, but the merged attributes object now inherits attacker-controlled keys. Because the consuming set() function then enumerates the merged object with another for...in, every key the attacker placed on the polluted prototype lands in the resulting Set-Cookie string as an attribute pair. The attacker can set domain=, secure=, samesite=, expires=, and path= on cookies whose attributes the developer thought were locked down. This issue has been patched in version 3.0.7. |