| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/cm: Drop lockdep assert and WARN when freeing old msg
The send completion handler can run after cm_id has advanced to another
message. The cm_id lock is not needed in this case, but a recent change
re-used cm_free_priv_msg(), which asserts that the lock is held and
WARNs if the cm_id's currently outstanding msg is different than the one
being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix CPER handler device confusion
By inspection, cxl_cper_handle_prot_err() is making a series of fragile
assumptions that can lead to crashes:
1/ It assumes that endpoints identified in the record are a CXL-type-3
device, nothing guarantees that.
2/ It assumes that the device is bound to the cxl_pci driver, nothing
guarantees that.
3/ Minor, it holds the device lock over the switch-port tracing for no
reason as the trace is 100% generated from data in the record.
Correct those by checking that the PCIe endpoint parents a cxl_memdev
before assuming the format of the driver data, and move the lock to where
it is required. Consequently this also makes the implementation ready for
CXL accelerators that are not bound to cxl_pci. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: validate AG parameters in dbMount() to prevent crashes
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on sit_bitmap_size
w/ below testcase, resize will generate a corrupted image which
contains inconsistent metadata, so when mounting such image, it
will trigger kernel panic:
touch img
truncate -s $((512*1024*1024*1024)) img
mkfs.f2fs -f img $((256*1024*1024))
resize.f2fs -s -i img -t $((1024*1024*1024))
mount img /mnt/f2fs
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.h:863!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 11 UID: 0 PID: 3922 Comm: mount Not tainted 6.15.0-rc1+ #191 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_ra_meta_pages+0x47c/0x490
Call Trace:
f2fs_build_segment_manager+0x11c3/0x2600
f2fs_fill_super+0xe97/0x2840
mount_bdev+0xf4/0x140
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x29/0xd0
path_mount+0x487/0xaf0
__x64_sys_mount+0x116/0x150
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdbfde1bcfe
The reaseon is:
sit_i->bitmap_size is 192, so size of sit bitmap is 192*8=1536, at maximum
there are 1536 sit blocks, however MAIN_SEGS is 261893, so that sit_blk_cnt
is 4762, build_sit_entries() -> current_sit_addr() tries to access
out-of-boundary in sit_bitmap at offset from [1536, 4762), once sit_bitmap
and sit_bitmap_mirror is not the same, it will trigger f2fs_bug_on().
Let's add sanity check in f2fs_sanity_check_ckpt() to avoid panic. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_hfsc: make hfsc_qlen_notify() idempotent
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not double dequeue a configuration request
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/cesa - Handle zero-length skcipher requests
Do not access random memory for zero-length skcipher requests.
Just return 0. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: zone: fix to avoid inconsistence in between SIT and SSA
w/ below testcase, it will cause inconsistence in between SIT and SSA.
create_null_blk 512 2 1024 1024
mkfs.f2fs -m /dev/nullb0
mount /dev/nullb0 /mnt/f2fs/
touch /mnt/f2fs/file
f2fs_io pinfile set /mnt/f2fs/file
fallocate -l 4GiB /mnt/f2fs/file
F2FS-fs (nullb0): Inconsistent segment (0) type [1, 0] in SSA and SIT
CPU: 5 UID: 0 PID: 2398 Comm: fallocate Tainted: G O 6.13.0-rc1 #84
Tainted: [O]=OOT_MODULE
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
<TASK>
dump_stack_lvl+0xb3/0xd0
dump_stack+0x14/0x20
f2fs_handle_critical_error+0x18c/0x220 [f2fs]
f2fs_stop_checkpoint+0x38/0x50 [f2fs]
do_garbage_collect+0x674/0x6e0 [f2fs]
f2fs_gc_range+0x12b/0x230 [f2fs]
f2fs_allocate_pinning_section+0x5c/0x150 [f2fs]
f2fs_expand_inode_data+0x1cc/0x3c0 [f2fs]
f2fs_fallocate+0x3c3/0x410 [f2fs]
vfs_fallocate+0x15f/0x4b0
__x64_sys_fallocate+0x4a/0x80
x64_sys_call+0x15e8/0x1b80
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f9dba5197ca
F2FS-fs (nullb0): Stopped filesystem due to reason: 4
The reason is f2fs_gc_range() may try to migrate block in curseg, however,
its SSA block is not uptodate due to the last summary block data is still
in cache of curseg.
In this patch, we add a condition in f2fs_gc_range() to check whether
section is opened or not, and skip block migration for opened section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Don't treat wb connector as physical in create_validate_stream_for_sink
Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector.
While dereferencing aconnector->base will "work" it's wrong and
might lead to unknown bad things. Just... don't. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
In
riocm_cdev_ioctl(RIO_CM_CHAN_SEND)
-> cm_chan_msg_send()
-> riocm_ch_send()
cm_chan_msg_send() checks that userspace didn't send too much data but
riocm_ch_send() failed to check that userspace sent sufficient data. The
result is that riocm_ch_send() can write to fields in the rio_ch_chan_hdr
which were outside the bounds of the space which cm_chan_msg_send()
allocated.
Address this by teaching riocm_ch_send() to check that the entire
rio_ch_chan_hdr was copied in from userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase block_sequence array size
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: protect vq->log_used with vq->mutex
The vhost-scsi completion path may access vq->log_base when vq->log_used is
already set to false.
vhost-thread QEMU-thread
vhost_scsi_complete_cmd_work()
-> vhost_add_used()
-> vhost_add_used_n()
if (unlikely(vq->log_used))
QEMU disables vq->log_used
via VHOST_SET_VRING_ADDR.
mutex_lock(&vq->mutex);
vq->log_used = false now!
mutex_unlock(&vq->mutex);
QEMU gfree(vq->log_base)
log_used()
-> log_write(vq->log_base)
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: Do not truncate file size
'len' is used to store the result of i_size_read(), so making 'len'
a size_t results in truncation to 4GiB on 32-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie
The IOMMU translation for MSI message addresses has been a 2-step process,
separated in time:
1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address
is stored in the MSI descriptor when an MSI interrupt is allocated.
2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a
translated message address.
This has an inherent lifetime problem for the pointer stored in the cookie
that must remain valid between the two steps. However, there is no locking
at the irq layer that helps protect the lifetime. Today, this works under
the assumption that the iommu domain is not changed while MSI interrupts
being programmed. This is true for normal DMA API users within the kernel,
as the iommu domain is attached before the driver is probed and cannot be
changed while a driver is attached.
Classic VFIO type1 also prevented changing the iommu domain while VFIO was
running as it does not support changing the "container" after starting up.
However, iommufd has improved this so that the iommu domain can be changed
during VFIO operation. This potentially allows userspace to directly race
VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and
VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()).
This potentially causes both the cookie pointer and the unlocked call to
iommu_get_domain_for_dev() on the MSI translation path to become UAFs.
Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA
address is already known during iommu_dma_prepare_msi() and cannot change.
Thus, it can simply be stored as an integer in the MSI descriptor.
The other UAF related to iommu_get_domain_for_dev() will be addressed in
patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by
using the IOMMU group mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: abort dispatch if device destroyed
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report") |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu read protection for procfs content
When the procfs content is generated for a bcm_op which is in the process
to be removed the procfs output might show unreliable data (UAF).
As the removal of bcm_op's is already implemented with rcu handling this
patch adds the missing rcu_read_lock() and makes sure the list entries
are properly removed under rcu protection. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()
Not everything requires locking in there, which is why the 'has_lock'
variable exists. But enough does that it's a bit unwieldy to manage.
Wrap the whole thing in a ->uring_lock trylock, and just return
with no output if we fail to grab it. The existing trylock() will
already have greatly diminished utility/output for the failure case.
This fixes an issue with reading the SQE fields, if the ring is being
actively resized at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Add patch from MediaTek's SDK to resolve this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: adjust subpage bit start based on sectorsize
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs. |