| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The user-mode system call verifier z_vrfy_charger_get_prop() in drivers/charger/charger_handlers.c declares an uninitialized union charger_propval k_val on the kernel (privileged) stack, passes it to the charger driver back end via z_impl_charger_get_prop(), and then copies the full sizeof(union charger_propval) back into the calling user thread's buffer with k_usermode_to_copy(). That discloses kernel stack contents on two paths:
On error. The copy-out ignores the driver's return code. In-tree back ends return an error without writing through the value pointer for properties they do not implement: charger_gpio_get_prop() returns -ENOTSUP unconditionally, and bq24190_get_prop() has a default: return -ENOTSUP; arm that never touches val. The whole union is then stack residue.
On success. A back end writes only the one union member the requested property selects (for example sbs_charger.c writes the one-byte val->present for CHARGER_PROP_PRESENT and returns 0), yet the handler still copies the whole union, so every byte beyond that member is uninitialized.
The handler is compiled only when CONFIG_USERSPACE=y and is reachable by any user-mode thread that has been granted access to a charger device object. K_SYSCALL_DRIVER_CHARGER() validates only the device object and its API pointer, not the property identifier, so an unprivileged thread can choose prop freely: an unimplemented property forces the error path, a narrow one the success path, and the call can be repeated at will.
Each call discloses up to the size of the union (12 bytes on a 32-bit target, 16 bytes on 64-bit targets where the function-pointer members widen it) of supervisor-stack memory. The bytes are residue of earlier kernel-side frames on the thread's privileged stack and can contain kernel object addresses and saved return addresses, which an unprivileged thread cannot otherwise observe and which help defeat address-layout assumptions when exploiting a separate memory-safety defect. There is no integrity or availability impact.
Two commits fix it, and both are needed. 5054384e983c skips the copy-out when the back end reports an error. c31cac727d02 zeroes the union before the driver call, so the bytes copied out on success are driver-written data or zeros. A tree carrying only the first still leaks on every successful call. |
| SAP Start Service and SAP Management Console store sensitive credential information in process memory without protection. An attacker with high privileges and local access could inspect the memory to recover credentials and reuse them for authentication. This results in a high impact on confidentiality and no impact on integrity and availability. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Execution with unnecessary privileges in SQL Server allows an authorized attacker to elevate privileges over a network. |
| Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion.
The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source.
On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, OTP 28.5.0.4, and OTP 29.0.4, corresponding to erts from 6.0 before 15.2.7.11, 16.4.0.4, and 17.0.4. |
| The Royal MCP WordPress plugin before 1.4.26 does not perform capability checks on the majority of its MCP tools after token authentication, allowing authenticated users with a low-privileged role such as Subscriber to read private content, enumerate all users and their roles, and create, modify, or delete content owned by other users. |
| Local privilege escalation vulnerability in Iperius Backup 8.8.3, due to insufficient separation between the graphical user interface running with elevated privileges and local users with low privileges. When the backup service is configured to run persistently with Administrator privileges, a local attacker with low privileges can use the native Windows dialogues exposed by the application to run programmes that inherit its elevated context. This allows commands to be executed with SYSTEM or Administrator privileges, depending on the application’s context, and compromises the affected Windows system. |
| JupyterLab Desktop is the cross-platform desktop application for JupyterLab. Prior to 4.6.2-1, JupyterLab Desktop for macOS shipped with Electron's RunAsNode fuse enabled, allowing ELECTRON_RUN_AS_NODE to execute arbitrary Node.js code in the application process. An attacker who can already execute code as the current user can therefore run code in JupyterLab Desktop's context and inherit TCC permissions previously granted to the application, including access to protected Documents, Desktop, or Downloads folders without another macOS prompt. Exploitation requires existing local code execution and prior TCC grants; it does not provide initial or remote code execution. Windows and Linux are not affected. This vulnerability is fixed in 4.6.2-1. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Plaintext Storage of a Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to information disclosure. |
| Privilege elevation in Mobile in Google Chrome on on iOS prior to 157.0.8103.38 allowed a remote attacker to bypass system access restrictions into a privileged page via a crafted HTML page. (Chromium security severity: Medium) |
| Use of Hard-coded Password vulnerability in the AdminServer component in Apache OFBiz 24.09.07 on all platforms allows an attacker able to reach the AdminServer control port to query the server's running state and trigger an unauthenticated shutdown of the instance via the fixed default control key shipped in start.properties.
Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream.
Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails,
because as per AMD:
there's no explicit architectural guarantee about the behavior in the
presence of VMRUN failures. So the best thing to do would be to assume
that if VMRUN fails, the actions requested in the control fields may not
have been performed. |
| A vulnerability was determined in D-Link DCS-6501LH 3.03.02. This impacts the function pf_get_onvif_user_pwd/mydlink_default_sys_info of the file /mnt/conf/SystemConfig.ini of the component Media Service. This manipulation of the argument pin_code causes hard-coded credentials. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| Credentials are stored in plain text in an SQLite database and in the MatchPoint Android app's SharedPreferences. An attacker with access to the device's local data or a backup could retrieve usernames and passwords and use them to gain unauthorized access to accounts on the platform. |
| A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible. |
| A flaw was found in operator-sdk-builder. Due to an oversight in the Containerfile configuration, the final built container image runs with root privileges by default. This increases the attack surface of the container, as any process executed within it will have elevated permissions. If a malicious actor compromises the container, they could leverage these root privileges to perform unauthorized actions, potentially leading to a broader system compromise. |
| FFmpeg through 9.0.2 contains a NULL pointer dereference vulnerability in g726_decode_frame() in libavcodec/g726.c because it ignores init_get_bits() failure on oversized packets. Attackers can supply a crafted AVI file with a 268435392-byte G.726 audio chunk to make the decoder read from a NULL buffer, crashing the process. |
| FFmpeg through 9.0.2 contains a NULL pointer dereference vulnerability in vble_decode_frame() in libavcodec/vble.c because it ignores init_get_bits() failure on oversized packets. Attackers can supply a crafted AVI file with a 268435452-byte VBLE frame, causing reads from a NULL bit reader buffer that crash the process. |
| FFmpeg through 9.0.2 contains a NULL pointer dereference vulnerability in the Bink video decoder because decode_frame() in libavcodec/bink.c ignores init_get_bits() failure. Attackers can supply a crafted Bink file with a frame of about 2^28 bytes, overflowing the bit count and crashing the process for denial of service. |