| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state
Explicitly flush caches after intra-host migration before clearing "SEV
active" on the source VM, as doing cache maintenance afterwards creates a
tiny window where memory reclaim could return memory to the host without
performing a cache flush, e.g. as pointed out by Sashiko:
CPU1 in sev_migrate_from():
src->active = false;
CPU2 running concurrent unmap:
Since active is false, the automatic cache flush in
sev_guest_memory_reclaimed is skipped.
The host frees and reallocates the page.
CPU1 in sev_migrate_from():
sev_writeback_caches(src_kvm);
Executes a hardware cache flush (wbnoinvd), which writes the guest's old
dirty ciphertext over the new page owner's data. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: copy the hostid into the ctrl before creating PR pc_refs
Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and
implementation") added a second uuid_copy() of args->hostid near the end
of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate
uuid_copy") removed the original copy that sat before
nvmet_ctrl_init_pr() instead of the new one.
Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the
per-controller per-namespace reservation refs while the uuid_copy()
from the connect data runs later, after the controller is published.
The ctrl is allocated with kzalloc(), so every pc_ref created on this
path stores the nil UUID.
pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort()
matches it against the preempted registrant's hostid to kill and drain
the victim's in-flight I/O for Preempt and Abort. The match can never
hit with the nil UUID, so whenever a namespace with reservations
enabled exists before a host connects, which includes every reconnect,
Preempt and Abort silently degrades into a plain Preempt: the
preempting host sees success while the victim's in-flight I/O is still
in the air.
Copy the hostid where the rest of the connect data is consumed, before
the controller is published and before nvmet_ctrl_init_pr() takes its
snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq
Referencing the last interrupt inserted in an LR is rather fragile, as
this interrupt can vanish if a concurrently unmapped LPI.
Solve this by bumping up the refcount on the interrupt when populating
last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are
being reclaimed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Reassign nested_mmus array behind mmu_lock
kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the
MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which
can run at any time. kvm_vcpu_init_nested() reallocates the array and frees
the old buffer while holding only kvm->arch.config_lock, so such a walker
can reference the freed array.
Allocate the new array outside of mmu_lock, as the allocation can sleep.
Under the lock, copy the existing entries, fix up the back pointers and
reassign the array. Free the old buffer after dropping the lock, as
kvfree() can sleep as well. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: validate SVM ioctl nattr against buffer size
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: Only release RCU read lock after ct_ft
When looking up a flow table in act_ct in tcf_ct_flow_table_get(),
rhashtable_lookup_fast() internally opens and closes an RCU read critical
section before returning ct_ft.
The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero()
is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft
object. This vulnerability can lead to privilege escalation.
Analysis from zdi-disclosures@trendmicro.com:
When initializing act_ct, tcf_ct_init() is called, which internally triggers
tcf_ct_flow_table_get().
static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params)
{
struct zones_ht_key key = { .net = net, .zone = params->zone };
struct tcf_ct_flow_table *ct_ft;
int err = -ENOMEM;
mutex_lock(&zones_mutex);
ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1]
if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2]
goto out_unlock;
...
}
static __always_inline void *rhashtable_lookup_fast(
struct rhashtable *ht, const void *key,
const struct rhashtable_params params)
{
void *obj;
rcu_read_lock();
obj = rhashtable_lookup(ht, key, params);
rcu_read_unlock();
return obj;
}
At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft
from zones_ht . The lookup is performed within an RCU read critical section
through rcu_read_lock() / rcu_read_unlock(), which prevents the object from
being freed. However, at the point of function return, rcu_read_unlock() has
already been called, and there is nothing preventing ct_ft from being freed
before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes
the race window, during which ct_ft can be freed.
Free Process:
tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu()
tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put().
static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft)
{
if (refcount_dec_and_test(&ct_ft->ref)) {
rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params);
INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3]
queue_rcu_work(act_ct_wq, &ct_ft->rwork);
}
}
At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work
static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
{
struct tcf_ct_flow_table *ct_ft;
struct flow_block *block;
ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
rwork);
nf_flow_table_free(&ct_ft->nf_ft);
block = &ct_ft->nf_ft.flow_block;
down_write(&ct_ft->nf_ft.flow_block_lock);
WARN_ON(!list_empty(&block->cb_list));
up_write(&ct_ft->nf_ft.flow_block_lock);
kfree(ct_ft); // [4]
module_put(THIS_MODULE);
}
tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes
between [1] and [2], UAF occurs.
This race condition has a very short race window, making it generally
difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was
inserted after[1] |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: Fix IPv6 inner_thoff desync
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is
rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map
access path and triggers:
Unable to handle kernel paging request at virtual address ...
pc : __pi_memcpy_generic+0x5c/0x22c
lr : bpf_percpu_array_update+0x2dc/0x2e8
Call trace:
__pi_memcpy_generic
bpf_map_update_value
map_update_elem
__sys_bpf
Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This
rejects CPU IDs outside the valid range and CPUs absent from the
possible mask, while allowing valid sparse CPU IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds checks for firmware log indices
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Use krealloc_array() in dal_vector_reserve()
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: trf7970a: power down on startup RX gain failure
trf7970a_startup() powers up the device before applying the optional RX
gain reduction. If the register read or write fails, it returns without
undoing that power-up. Probe's unwind only drops the separate regulator
references acquired by probe, leaving the additional VIN enable from
startup unbalanced. The system resume caller also has no power-down on
this error.
Call trf7970a_power_down() before returning the RX gain error to deassert
the enable GPIOs, release the startup VIN reference and restore the
powered-off state. Runtime PM has not been enabled yet, so the full
shutdown helper is not appropriate here. Preserve the original SPI error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: bound the RX packet length in catc_rx_done()
catc_rx_done() walks a multi-packet URB, reading a two-byte length from
each packet header. Its bound, pkt_len > urb->actual_length, ignores the
header offset and compares against the whole transfer rather than the
bytes left from pkt_start, so a crafted packet header makes
skb_copy_to_linear_data() read past the buffer.
A length below ETH_HLEN is also accepted, including zero, and
eth_type_trans() then reads a MAC header from the uninitialised tailroom
of a shorter skb. The is_f5u011 branch takes its length straight from
the transfer, so a zero-length URB reaches the same path.
Track the bytes remaining from the current packet, and reject a header
that does not fit, a length past what is left, and a length below an
Ethernet header.
A transfer shorter than an Ethernet header, including a zero-length one,
previously became a runt skb passed to netif_rx() and counted as
received; it is now counted in rx_length_errors and ends the walk. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex>
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
<TASK>
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK> |