| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A flaw was found in Red Hat Enterprise Application Platform 8. When an OIDC app that serves multiple tenants attempts to access the second tenant, it should prompt the user to log in again since the second tenant is secured with a different OIDC configuration. The underlying issue is in OidcSessionTokenStore when determining if a cached token should be used or not. This logic needs to be updated to take into account the new "provider-url" option in addition to the "realm" option.
EAP-7 does not provide the vulnerable provider-url configuration option in its OIDC implementation and is not affected by this flaw. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, any contact may forge a sync message, impersonating another device of the local user. The origin of sync messages is not checked. Patched libsignal-service can be found after commit 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| sshpiper is a reverse proxy for sshd. Starting in version 1.0.50 and prior to version 1.3.0, the way the proxy protocol listener is implemented in sshpiper can allow an attacker to forge their connecting address. Commit 2ddd69876a1e1119059debc59fe869cb4e754430 added the proxy protocol listener as the only listener in sshpiper, with no option to toggle this functionality off. This means that any connection that sshpiper is directly (or in some cases indirectly) exposed to can use proxy protocol to forge its source address. Any users of sshpiper who need logs from it for whitelisting/rate limiting/security investigations could have them become much less useful if an attacker is sending a spoofed source address. Version 1.3.0 contains a patch for the issue. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| stats is a macOS system monitor in for the menu bar. The Stats application is vulnerable to a local privilege escalation due to the insecure implementation of its XPC service. The application registers a Mach service under the name `eu.exelban.Stats.SMC.Helper`. The associated binary, eu.exelban.Stats.SMC.Helper, is a privileged helper tool designed to execute actions requiring elevated privileges on behalf of the client, such as setting fan modes, adjusting fan speeds, and executing the `powermetrics` command. The root cause of this vulnerability lies in the `shouldAcceptNewConnection` method, which unconditionally returns YES (or true), allowing any XPC client to connect to the service without any form of verification. As a result, unauthorized clients can establish a connection to the Mach service and invoke methods exposed by the HelperTool interface. An attacker can exploit this vulnerability to modify the hardware settings of the user’s device and execute arbitrary code with root privileges. This issue has been addressed in version 2.11.21 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected components do not properly authenticate heartbeat messages. This could allow an unauthenticated remote attacker to affected the availability of secondary RTLS systems configured using a TeeRevProxy service and potentially cause loss of data generated during the time the attack is ongoing. |
| Matrix JavaScript SDK is a Matrix Client-Server SDK for JavaScript and TypeScript. matrix-js-sdk before 38.2.0 has insufficient validation of room predecessor links in MatrixClient::getJoinedRooms, allowing a remote attacker to attempt to replace a tombstoned room with an unrelated attacker-supplied room. The issue has been patched and users should upgrade to 38.2.0. A workaround is to avoid using MatrixClient::getJoinedRooms in favor of getRooms() and filtering upgraded rooms separately. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| CGGMP24 is a state-of-art ECDSA TSS protocol that supports 1-round signing (requires 3 preprocessing rounds), identifiable abort, and a key refresh protocol. Prior to version 0.6.3, there is a missing check in the ZK proof that enables an attack in which single malicious signer can reconstruct full private key. This issue has been patched in version 0.6.3, for full mitigation it is recommended to upgrade to cggmp24 version 0.7.0-alpha.2 as it contains more security checks. |
| An issue in the firmware update mechanism of Nous W3 Smart WiFi Camera v1.33.50.82 allows unauthenticated and physically proximate attackers to escalate privileges to root via supplying a crafted update.tar archive file stored on a FAT32-formatted SD card. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |