Export limit exceeded: 429120 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429120 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99478 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: filelock: keep superblock active through delegation wait A caller may drop its path after try_break_deleg() returns a delegated inode but before break_deleg_wait() finishes. The extra inode reference held in struct delegated_inode does not keep the superblock active. After a lazy unmount, closing the delegation holder can release the last mount reference and shut down the superblock while another task waits for the delegation break. The waiter's final iput() can then enter the filesystem's eviction code after its superblock-private state was freed. This has been observed as a KASAN use-after-free in shmem_evict_inode(). When try_break_deleg() saves a delegated inode, take an active reference to its superblock while the caller still pins the mount. Keep that reference through break_deleg_wait() and the final iput(), then release it with deactivate_super(). This protects every caller of the helpers, including the mknod, mkdir, symlink and rmdir paths that drop their path before waiting.
CVE-2026-128064 1 Php 1 Php 2026-11-19 N/A
Mixed-case HTTPS and FTPS URLs can expose data in plaintext. The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files. This issue affects PHP versions 8.2.* before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-99477 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [akpm@linux-foundation.org: remove unneeded & undesirable test for !mm]
CVE-2026-99476 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().
CVE-2026-99475 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt handler oopses) without returning from irq_thread(), a concurrent call to free_irq() could free the irqaction before the irq_thread_dtor() exit task work runs. irq thread (oopsed) free_irq() ------------------- ---------- do_exit() exit_mm() complete_vfork_done() -------> kthread_stop() returns exit_files() ... kfree(action) exit_task_work() irq_thread_dtor() action->... <- use-after-free Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have __free_irq() wait for the bit to clear before kfree(). irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also faults, free_irq() will hang indefinitely, but double IRQ thread faults require a reboot anyways. [ tglx: Add missing include ]
CVE-2026-99474 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: HID: hiddev: keep state alive through disconnect unlock mutex_unlock() clears the mutex owner before taking its wait lock. A thread spinning in the final hiddev file release can acquire existancelock after hiddev_disconnect() clears the owner, then free hiddev before the disconnecting thread reaches the mutex wait lock. This causes a use-after-free in the mutex slow unlock path. Give the connection and each open file an explicit reference. Drop each reference only after its existancelock critical section has completed, so neither unlock path can free the mutex while the other is still using it.
CVE-2026-129474 1 Php 1 Php 2026-11-19 N/A
Use-after-free in magic method backtraces can lead to remote code execution. When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this. This issue affects PHP versions 8.5.* before 8.5.13.
CVE-2026-99473 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot If inserting a memslot into a guest_memfd's bindings xarray fails, propagate the error back to the caller, i.e. fail memslot creation as well. Signalling success and continuing on with memslot creation results in use-after-free, as the guest_memfd instance will remain reachable via the memslot after the file is freed (kvm_gmem_release() won't nullify the file pointer due to lack of a valid binding). Opportunistically WARN and reject binding if KVM_MEMSLOT_GMEM_ONLY is already set, partly to guard against goofs elsewhere, but mostly so that KVM doesn't need to worry about clobbering flags when unwinding on failure. Regarding the unwind, the slot must be fully prepared before inserting it into the bindings, at which point the slot becomes reachable. I.e. waiting to update the slot in order to avoid the ugly unwind isn't an option. And as part of the unwind, explicitly nullify the relevant bindings, as xarray can store a subset of entries when populating a range.
CVE-2026-99472 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: pfncache: use a dedicated invalidation sequence for cache refresh The gfn_to_pfn_cache refresh path guards against mmu notifier invalidations which complete while it has dropped gpc->lock for the HVA->PFN lookup: hva_to_pfn_retry() samples kvm->mmu_invalidate_seq and retries if it changed, or if mn_active_invalidate_count is still elevated. That is insufficient for HVA-based caches. mmu_invalidate_seq is only advanced by kvm_mmu_invalidate_end() when the invalidated range overlaps a memslot, and an HVA-based cache (e.g. the Xen shared_info page mapped with KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA) need not be backed by any memslot at all. An invalidation of the cached HVA which starts and ends entirely within the lookup window is thus invisible to the retry check: mn_active_invalidate_count is back to zero and the sequence never moved. The refresh then publishes a mapping of a page which has already been freed, and the next reader dereferences it: BUG: KASAN: use-after-free in kvm_xen_shared_info_init+0x3c6/0x440 Read of size 4 at addr ffff8880599c2900 by task syz.2.383/7257 Since gfn_to_pfn_cache_invalidate_start() deliberately skips caches which are not currently valid (including one whose refresh is in progress, as the refresh clears the valid flag before dropping the lock), the retry check is the only line of defence, and it must fire for *any* invalidation, not just those hitting a memslot. Add a dedicated kvm->gpc_invalidate_seq, incremented by every kvm_mmu_notifier_invalidate_range_end() under mn_invalidate_lock before mn_active_invalidate_count is decremented, and check it in hva_to_pfn_retry() instead of mmu_invalidate_seq. Incrementing in range_end() in the same critical section as the in-progress count also closes the variant where the cache is activated with the contested HVA only after invalidate_range_start() has run. The same bug is also reachable through the per-vCPU vcpu_info cache (KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA), where the stale mapping is then dereferenced by kvm_setup_guest_pvclock() on the next KVM_RUN: BUG: KASAN: use-after-free in kvm_setup_guest_pvclock+0x5bf/0x660 This intentionally makes refresh retry on *unrelated* mmu notifier events; restoring precision (and reworking the GPC locking more generally) is left for a subsequent series. Reproducers: https://david.woodhou.se/xen_shinfo_race.c https://david.woodhou.se/vcpu_info_race.c
CVE-2026-99471 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE, H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses memslots via kvm_memslots_raw(). kvm_memslots_raw() uses rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking. This is safe in real mode because the entire guest entry/exit is wrapped in srcu_read_lock/unlock inside kvmppc_run_core() and kvmhv_run_single_vcpu(). However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page faults"), these same handlers are also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs after SRCU has already been released on guest exit. A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore call synchronize_srcu_expedited() — which does not wait for this thread — and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler still holds a raw pointer to the memslot. lock_rmap() then writes to freed vmalloc memory, leading to use-after-free and memory corruption. Because kvm_memslots_raw() suppresses lockdep checks, this race is entirely silent. Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx). Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep (such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already acquire SRCU internally (such as H_RTAS).
CVE-2026-99470 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: unregister DVB bus when SP2 CI setup fails The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register the DVB bus before attaching their SP2 CI client. If that client cannot be created, bound, or pinned, the current error path removes the I2C frontend components and only deallocates the frontend list, leaving the registered DVB adapter behind. Removing an I2C demod before unregistering the DVB bus can also expose the use-after-free ordering fixed for the normal remove path. Unregister the DVB bus immediately when SP2 CI setup fails, before the existing I2C client cleanup. The bus helper empties the frontend list, so the later frontend deallocation has nothing left to release. Keep failures from vb2_dvb_register_bus() on the existing cleanup path. Also release an unbound SP2 client and propagate the actual I2C creation or CI registration error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.
CVE-2026-128090 1 Php 1 Php 2026-11-19 N/A
PHAR OpenSSL signature bypass via algorithm downgrade. The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected. This issue affects PHP versions 8.2.* before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-99469 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: gspca: use vb2_video_unregister_device() on disconnect gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters the video device. If the queue owner closes the device after USB disconnect, vb2_fop_release() releases the queue and invokes gspca_stop_streaming() at that point. gspca_stream_off() calls subdriver stop callbacks and usb_set_interface() through gspca_dev->dev. By the time the late close runs, the USB core can have freed the usb_device, resulting in a use-after-free. This was observed as a KASAN use-after-free in sd_stopN(). Use vb2_video_unregister_device() so the queue is released and streaming is stopped synchronously during disconnect, while the usb_device is still valid. Since the helper takes the queue lock, which is usb_lock, call it after dropping that lock.
CVE-2026-99468 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: cancel timeout worker when streaming stops Each per-fd context ctx owns a delayed_work (ctx->task_timer, callback mxc_jpeg_device_run_timeout) armed via schedule_delayed_work() at the end of mxc_jpeg_device_run() to recover a stalled encode/decode job. The only existing cancellation is cancel_delayed_work() in the frame-done IRQ handler, which de-queues a pending work item but does not wait for a callback that has already started, and it only runs when a frame completes. When the fd is closed while a job is in flight (the frame-done IRQ has not fired yet), nothing syncs the worker before mxc_jpeg_release() frees ctx with kfree() after v4l2_m2m_ctx_release(). A queued or executing mxc_jpeg_device_run_timeout() can then recover ctx through container_of(&ctx->task_timer) and dereference it (ctx->mxc_jpeg, slot_data, dev_warn) after ctx has been freed. Cancel the worker from mxc_jpeg_stop_streaming(). The cancel cannot live in mxc_jpeg_release(): mxc_jpeg_device_run() arms the timer while holding only hw_lock, not the mxc_jpeg->lock mutex that release holds, so a cancel in release could still race a concurrent mxc_jpeg_device_run() that re-arms the timer afterwards. mxc_jpeg_stop_streaming() instead runs inside v4l2_m2m_ctx_release() -> vb2_queue_release(), i.e. after v4l2_m2m_cancel_job() has set TRANS_ABORT and waited for any in-flight job to finish (so __v4l2_m2m_try_queue() will not queue and v4l2_m2m_try_run() will not run any further job for this context, which prevents mxc_jpeg_device_run() from re-arming the timer) and before the m2m context is freed. cancel_delayed_work_sync() removes a pending work item and waits for a running callback, so the worker can no longer race with the subsequent kfree(). The cancel is placed before the buffer-release loop so a concurrently running timeout callback cannot race with it over the same buffers. If the frame-done IRQ canceled a still-pending timer, this cancel is a no-op; if the timeout callback has already started, it waits for the callback to finish. The same mxc_jpeg_stop_streaming() call is also reached from VIDIOC_STREAMOFF, which drains the worker early, although STREAMOFF itself does not free ctx -- the use-after-free arises only when the fd is later closed. This bug was found by static analysis.
CVE-2026-129538 1 Php 1 Php 2026-11-19 N/A
PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions 8.2.* before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-129506 1 Php 1 Php 2026-11-19 N/A
SOAP use-after-free when processing DTD entity references. The SOAP extension frees the document type definition (DTD) of a parsed XML document while attribute values can still refer to entities it owns, and can then read freed memory. Removing the DTD also bypasses the SOAP server's rejection of documents that contain one. An unauthenticated remote attacker who can send a crafted request to a SOAP endpoint, or who controls a WSDL or schema document loaded by the application, can crash the PHP process and cause denial of service. Memory disclosure and code execution have not been confirmed. This issue affects PHP versions 8.2.* before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-99467 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: marvell: mcam: stop DMA and cancel s_bh_work before freeing DMA buffers In vmalloc mode the frame-completion IRQ queues mcam_frame_work() on cam->s_bh_work, which memcpy()s from the dma_bufs[] that mcam_free_dma_bufs() frees with dma_free_coherent(). mccic_shutdown() frees those buffers without stopping the controller, so while streaming a late frame IRQ can re-arm the work after the buffers are gone, causing a use-after-free. Stop the controller in mccic_shutdown() when streaming is still active (gated on an open fd, which holds a runtime-PM reference, so the device is powered), cancel s_bh_work in mcam_free_dma_bufs(), and move INIT_WORK() into mccic_register() before the device can be published.
CVE-2026-101688 1 Oracle 2 E-business Suite, E-business Suite Integrated Soa Gateway 2026-11-19 8.6 High
Vulnerability in the Oracle E-Business Suite Integrated SOA Gateway product of Oracle E-Business Suite (component: SOA Provider). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle E-Business Suite Integrated SOA Gateway. While the vulnerability is in Oracle E-Business Suite Integrated SOA Gateway, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle E-Business Suite Integrated SOA Gateway accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N).
CVE-2026-99466 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: microchip-csi2dc: fix async notifier leak on probe error path csi2dc_of_parse() ends up calling csi2dc_prepare_notifier(), which registers the V4L2 async notifier with v4l2_async_nf_register(). The probe error label csi2dc_probe_cleanup_notifier is reached after csi2dc_of_parse() has already succeeded (e.g. when media entity init, csi2dc_power() or v4l2_async_register_subdev() fail), but it calls only v4l2_async_nf_cleanup() and never v4l2_async_nf_unregister(). The notifier therefore stays chained in the global notifier_list while the enclosing struct csi2dc_device is freed, leading to list corruption and a use-after-free when the list is next walked. Unregister the notifier before cleaning it up on the error path, matching the teardown already done in csi2dc_remove().
CVE-2026-129292 1 Php 1 Php 2026-11-19 N/A
PHP-FPM status endpoint XSS via unescaped user and script fields. The PHP-FPM full status output includes the request method, authentication user and script filename of each worker without escaping them for the HTML, XML or JSON format. When the status endpoint is enabled, an unauthenticated remote attacker can store markup in a worker's scoreboard entry with an ordinary request, for example through the username of an HTTP Basic authentication header that the web server forwards to PHP-FPM, or through the script filename where the attacker can influence it. When a user views the full status page as HTML, the injected JavaScript runs in the origin of that page. The attacker does not need access to the status endpoint. Malformed XML or JSON output can also disrupt monitoring tools. This issue affects PHP versions 8.2.* before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.