Search Results (26719 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-64098 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences().
CVE-2026-64047 1 Linux 1 Linux Kernel 2026-10-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina).
CVE-2026-64046 1 Linux 1 Linux Kernel 2026-10-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective.
CVE-2026-64037 1 Linux 1 Linux Kernel 2026-10-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism.
CVE-2026-64035 1 Linux 1 Linux Kernel 2026-10-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.
CVE-2026-64026 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.
CVE-2026-64018 1 Linux 1 Linux Kernel 2026-10-19 9.3 Critical
In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array.
CVE-2026-64009 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH.
CVE-2026-64005 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity.
CVE-2026-64004 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops.
CVE-2026-64003 1 Linux 1 Linux Kernel 2026-10-19 7.5 High
In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called.
CVE-2025-40099 1 Linux 1 Linux Kernel 2026-10-19 9.4 Critical
In the Linux kernel, the following vulnerability has been resolved: cifs: parse_dfs_referrals: prevent oob on malformed input Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS - reply smaller than sizeof(struct get_dfs_referral_rsp) - reply with number of referrals smaller than NumberOfReferrals in the header Processing of such replies will cause oob. Return -EINVAL error on such replies to prevent oob-s.
CVE-2025-39811 1 Linux 1 Linux Kernel 2026-10-19 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)
CVE-2025-39792 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices.
CVE-2025-39776 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-10-19 7 High
In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: clear page table entries at destroy_args() The mm/debug_vm_pagetable test allocates manually page table entries for the tests it runs, using also its manually allocated mm_struct. That in itself is ok, but when it exits, at destroy_args() it fails to clear those entries with the *_clear functions. The problem is that leaves stale entries. If another process allocates an mm_struct with a pgd at the same address, it may end up running into the stale entry. This is happening in practice on a debug kernel with CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra debugging I added (it prints a warning trace if pgtables_bytes goes negative, in addition to the warning at check_mm() function): [ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000 [ 2.539366] kmem_cache info [ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508 [ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e (...) [ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0 [ 2.552816] Modules linked in: [ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY [ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries [ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90 [ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug) [ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a [ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0 [ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001 [ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff [ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000 [ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb [ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0 [ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000 [ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001 [ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760 [ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0 [ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0 [ 2.553199] Call Trace: [ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable) [ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0 [ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570 [ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650 [ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290 [ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0 [ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870 [ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150 [ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50 [ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0 [ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec (...) [ 2.558892] ---[ end trace 0000000000000000 ]--- [ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1 [ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144 Here the modprobe process ended up with an allocated mm_struct from the mm_struct slab that was used before by the debug_vm_pgtable test. That is not a problem, since the mm_stru ---truncated---
CVE-2025-39689 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers.
CVE-2025-39683 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed.
CVE-2025-38735 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver.
CVE-2025-40206 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^
CVE-2025-38710 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: gfs2: Validate i_depth for exhash directories A fuzzer test introduced corruption that ends up with a depth of 0 in dir_e_read(), causing an undefined shift by 32 at: index = hash >> (32 - dip->i_depth); As calculated in an open-coded way in dir_make_exhash(), the minimum depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time. So we can avoid the undefined behaviour by checking for depth values lower than the minimum in gfs2_dinode_in(). Values greater than the maximum are already being checked for there. Also switch the calculation in dir_make_exhash() to use ilog2() to clarify how the depth is calculated. Tested with the syzkaller repro.c and xfstests '-g quick'.