| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| N-able N-central before 2026.4.1 HF3 uses a predictable credential to authenticate appliances to an agent-facing API. A remote, unauthenticated attacker who knows or guesses an appliance identifier can obtain a valid appliance token and session and impersonate that appliance. |
| The Patch Management Engine in N-central is vulnerable to LPE via attacker controlled metadata |
| Issue summary: When an application passes a stack to
PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails,
OpenSSL frees every entry in the stack, both the old ones and any new
ones, but leaves them in the stack.
Impact summary: An application that passes an existing stack to
PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may
use memory that was already freed. This can cause a crash or, in
principle, memory corruption. Malformed PEM data can make the read fail,
but only applications that pass an existing stack are affected, and
OpenSSL itself does not do this.
CWE: CWE-416: Use After Free
Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and
private keys from PEM data and adds them to a stack of X509_INFO
structures. If the application passes a stack that is not NULL, the
function adds the new entries to it and must leave the entries that are
already there unchanged.
If reading fails, the function frees every entry in the stack. This
includes the entries that were there before the call, and the entries
added by the call. It does not remove these entries from the stack, so
the stack keeps pointers to freed memory. The failure can happen at any
point, even before any entry was added. A PEM item with invalid content
is enough. This also happens if the stack was empty: entries added
before the failure are freed but stay in the stack.
An application that then reads or frees the stack will use memory that
was already freed. This can crash the application or, in principle,
corrupt memory.
Only applications that pass a stack that is not NULL are affected.
OpenSSL itself never does this. Its own callers, including the code that
TLS uses to load CA certificates, always pass NULL. When the stack is
NULL, the function frees only the entries that it created itself, which
is safe. We expect that very few applications pass an existing stack. An
attacker can make the read fail with malformed PEM data, but cannot make
an application pass an existing stack.
The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read()
and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and
1.0.2 have only the first two of these functions.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| In nanobot, when sandboxed exec is enabled, the shell executable used to run commands can be selected by the caller and is launched before the sandbox is applied. An attacker who can induce the agent to create an executable in the workspace and select it as the shell can cause that executable to run outside the sandbox (e.g. Linux bubblewrap), with the operating-system permissions of the nanobot process.
This issue affects nanobot (nanobot-ai) from 0.2.1 before 0.4.1. |
| In nanobot, the WebSocket gateway allows a standard client holding a valid client token to select an existing directory outside the operator-configured workspace as the root of a new conversation. The agent can then read and expose files in that directory that are readable by the nanobot service account.
This issue affects nanobot (nanobot-ai) from 0.3.5 before 0.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short SESSION_SETUP responses
smb2_check_message() accepts frames shorter than struct smb2_pdu when
the SMB2 status is non-zero, before the minimum-PDU check added by
b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP
response is therefore accepted even though it cannot contain the
SecurityBufferOffset and SecurityBufferLength fields.
The parser then reads those fields from stale bytes left in the reused
receive buffer by an earlier frame. With a long stale
SecurityBufferLength, decode_ntlmssp_challenge() copies up to about
64 KB from beyond the receive object and sends the data back to the
server in the NTLMv2 AUTHENTICATE target info.
Reject short MPR SESSION_SETUP responses before the short-error path,
and validate SecurityBufferOffset + SecurityBufferLength against the
received response length before decoding the challenge.
The ordering bypass is not new: the short-error early return predates
b4694f269e66d, and the unvalidated SecurityBufferLength read predates
the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable
trees are affected. Reproduced on 6.6.87.2; the path is unchanged on
mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the data area in SMB2_read()
SMB2_read() copies le32_to_cpu(rsp->DataLength) bytes from
(char *)rsp + rsp->DataOffset without checking that the range lies
within the response actually received. A READ response with
DataOffset == 0 makes smb2_get_data_area_len() zero the data length, so
smb2_check_message() accepts a frame as short as the fixed response,
while SMB2_read() still uses the server-supplied DataLength, capped only
by CIFS_MAX_MSGSIZE and the caller's length.
A malicious server can answer the synchronous read used by the
mfsymlinks (or SFU) symlink parser with an 81-byte READ response
carrying DataOffset 0 and DataLength 1067, making the client copy 1067
bytes from a 448-byte receive object (KASAN slab-out-of-bounds; up to
16 KiB in the general case).
Clamp a zero (or header-overlapping) DataOffset to read_rsp_size, as
handle_read_data() does for the asynchronous path, and reject the
response unless DataOffset + DataLength fits within rsp_iov.iov_len.
The SMB1 helper was fixed the same way in 5be5bdda5863. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear CALLBACK_RUNNING on failed delegation recall queue
nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit
at entry to serialize recall work, then calls nfsd4_run_cb() to queue
the recall. When the queue attempt fails the refcount bump is undone,
but the RUNNING bit is left set. The only site that clears the bit is
nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the
workqueue and is therefore unreachable when nothing was queued.
The bit becomes a permanent latch on dp->dl_recall.cb_flags: every
subsequent break_lease() on the same delegation hits the early-return
guard in nfsd_break_one_deleg() and silently skips the recall, so the
delegation is never broken and the conflicting open or lock stalls.
Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside
the refcount_dec. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL. |
| An Out-of-bounds Read vulnerability [CWE-125] vulnerability in Fortinet FortiOS 7.6.0, FortiOS 7.4.0 through 7.4.4, FortiOS 7.2.0 through 7.2.9 may allow an unauthenticated remote attacker to trigger memory consumption leading to Denial of Service via crafted requests. |
| An Integer Overflow or Wraparound vulnerability [CWE-190] vulnerability in Fortinet FortiOS 7.4.0 through 7.4.4, FortiOS 7.2.0 through 7.2.11 may allow an authenticated attacker to crash the IPsec tunnel via crafted requests, resulting in potential denial of service. |
| Issue summary: A QUIC server that rejects a stream opened by the peer may
retain that stream's state for the lifetime of the connection if the peer
resets the stream before the rejection is signalled, even though the peer's
stream credit is returned.
Impact summary: A remote client that completes a QUIC handshake can repeatedly
open and reset streams, causing server memory to grow without bound until the
process runs out of memory and every connection on it is lost. This is a
Denial of Service.
CWE: CWE-401: Missing Release of Memory after Effective Lifetime
Description: QUIC servers track each stream the peer opens. When the incoming
stream policy rejects a stream, OpenSSL schedules a STOP_SENDING frame, marks
the stream deleted and returns the peer's stream credit. A deleted stream is
collected only once its receive part is fully drained, which for a rejected
stream means the STOP_SENDING has been acknowledged. If the peer sends
RESET_STREAM first, the reset cancels the pending STOP_SENDING, so it is never
sent or acknowledged and the stream is never collected.
The default configuration reaches this path. Once a connection has a default
stream, meaning the application has read from or written to the connection as
the tutorial server does, the effective incoming stream policy rejects streams
the application does not accept. Applications that set the REJECT policy
explicitly are affected too.
Each retained stream costs about 300 bytes, and the peer's stream credit
window paces how quickly they accumulate. A client that keeps the connection
open and keeps opening and resetting streams grows server memory without
bound. The severity is Low because growth is slow, needs a long-lived
connection, and causes no memory corruption or disclosure.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A server configured with the Suite B certificate flag through
SSL_CTX_set_cert_flags() and with TLS 1.3 enabled may read past the end of a
fixed group list when it processes a ClientHello whose supported_groups and
key_share contain no Suite B group.
Impact summary: A remote client can send a ClientHello that makes the server
read past the end of a static array. The values read are never returned to the
client, so no memory is disclosed; on builds with sanitizers or hardened
allocators the read may crash the process, causing Denial of Service.
CWE: CWE-125: Out-of-bounds Read
Description: When the Suite B certificate flag is set, OpenSSL restricts the
accepted groups to P-256 and P-384 by substituting a fixed two-element list
for the configured group list. The tuple machinery used for key-share
selection was not updated for this substitution: tls1_get_group_tuples() still
returns the configured tuples, which by default describe eight groups. The
server-side walk in tls_parse_ctos_key_share() then advances through the
two-element list using those tuple counts without checking the cumulative
offset against the number of groups present.
Only applications that call SSL_CTX_set_cert_flags() with
SSL_CERT_FLAG_SUITEB_128_LOS and leave TLS 1.3 enabled are affected. The
openssl s_server -suiteB_128 option sets an X.509 verification parameter
instead, so the stock command line server is not vulnerable. Default
configurations do not reach this code.
A client that offers only groups outside the Suite B set, such as X25519,
forces every tuple to be walked and the read to run past the array. The bytes
read are compared against client group IDs and never sent back, so no memory
is disclosed. On builds with address sanitizers or hardened allocators the
read can abort the process; in ordinary release builds it reads a few bytes of
adjacent constant data.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| The CODESYS Automation Server Connector uses server-supplied file names without sufficient path traversal checks. An unauthenticated remote attacker controlling a malicious Automation Server and tricking a user to trust it, or performing a man-in-the-middle attack on a trusted communication channel, can exploit this vulnerability to write attacker-controlled files to arbitrary locations on the engineering workstation and subsequently achieve arbitrary code execution with user privileges. |
| The affected products do not sufficiently validate CODESYS Automation Server TLS certificates when a user starts the certificate enrollment. An unauthenticated remote attacker performing a man-in-the-middle attack can exploit this vulnerability by supplying an untrusted certificate that is accepted as trusted. Successful exploitation may allow an attacker to intercept and manipulate communications between the CODESYS Automation Server and the PLC network. |
| The affected products process a server-supplied URL without sufficient validation. An unauthenticated remote attacker controlling a malicious Automation Server and tricking a user to trust it or performing a man-in-the-middle attack, can exploit this vulnerability by causing the affected product to process unintended content. Successful exploitation may result in arbitrary code execution with the privileges of the user running the affected product. |
| A Cross-Site Scripting (XSS) vulnerability reflected in the GET parameters `cod_primaria` and `cod_secundaria` of the Novanet Web endpoints `NNws_ShwNewDup` and `NPcd/NFG_VerNoticia`. User-provided data is reflected within a JavaScript block without proper sanitization or context-appropriate output encoding. An unauthenticated remote attacker could craft a manipulated URL that, when visited by a victim, would execute arbitrary JavaScript code in the victim’s browser, within the context of the affected site. The flaw resides in the platform’s shared code, so it could affect organizations using that vulnerable code. |
| In Eclipse Theia versions 1.66.0 and up until including 1.73.1, the `@theia/plugin-ext` backend exposes the `/hostedPlugin/:pluginId/:path(*)` HTTP endpoint, which resolves the requested file path with `path.resolve(localPath, filePath)` without verifying that the resolved path stays within the plugin's directory. An unauthenticated network attacker can send percent-encoded `../` sequences (`%2e%2e%2f`) that decode into the path parameter and escape the plugin directory, allowing arbitrary files readable by the Theia backend process to be retrieved. Plugin IDs are derived deterministically from a plugin's publisher and name, so built-in plugins serve as reliable anchors that require no prior knowledge of the target system. |