Export limit exceeded: 427917 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1817 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80519 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action. | ||||
| CVE-2026-80563 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind The "trigger" debugfs file has a hand-rolled ->write handler (trigger_write()) that dereferences the per-device gpio_la_poll_priv. The file is created with debugfs_create_file_unsafe(), and the handler never takes a debugfs reference. Nothing keeps the object alive while the handler runs. priv is allocated with devm_kzalloc(). devres frees it when the platform device is unbound. debugfs_create_file_unsafe() installs no full_proxy wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not wait for an in-flight trigger_write(). The blob_lock taken there does not help, because trigger_write() never takes it. A write that races an unbind therefore writes into freed memory: trigger_write() gpio_la_poll_remove() priv = m->private buf = memdup_user() [may sleep] mutex_lock(&priv->blob_lock) debugfs_remove_recursive() [no wait] mutex_unlock(&priv->blob_lock) (remove returns; devres frees priv) priv->trig_data = buf <-- use-after-free write priv->trig_len = count The race is reachable by root via /sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind. Create "trigger" with debugfs_create_file() instead. Its full_proxy wrapper makes debugfs_remove_recursive() drain any in-flight ->write before it returns. The use-after-free is confirmed under KASAN with a minimal reproducer of the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern (available on request); it produces a slab-use-after-free write in the handler. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-74628 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free of the socket by its timers The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80531 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid UAF on sc->tempip in xrep_tempfile_create LOLLM noticed a potential UAF if the tempfile creation code fails after it set sc->tempip. Fix that. | ||||
| CVE-2026-76021 | 1 Google | 1 Chrome | 2026-08-25 | 8.8 High |
| Use after free in DOM in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-74652 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ The RS485 trigger hrtimers are embedded in the devm-managed port and can fire after it is freed. The IRQ handler can arm a timer, so free the IRQ first and then cancel both timers. Complete the RS485 stop without arming a timer, and cancel the timers in remove() for the suspend-then-unbind path, where shutdown is not called. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-74642 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: Fix UAF at delayed release of MIDI2 EPs The recent fix for UAF in ump_to_endpoint() caused another UAF because it tries to dereference the UMP endpoint object, but this might be executed at a delayed context where the endpoint has been already released. Add private_free to clear the associated data for avoiding the further dereference for delayed releases. | ||||
| CVE-2026-74634 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Prevent subbuf order change when resizing is disabled Because ring_buffer_subbuf_order_set() frees buffer pages, we can't allow it when resizing is disabled. A non-consuming reader is at risk of use-after-free (rb_advance_iter()). Return -EBUSY on resize_disabled, matching ring_buffer_resize() behaviour. | ||||
| CVE-2026-74727 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip(). | ||||
| CVE-2026-74661 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired. | ||||
| CVE-2026-74606 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child. | ||||
| CVE-2026-74677 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai). | ||||
| CVE-2026-74441 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix race condition and ordering in port unregistration A synchronization issue exists during port unregistration where pending partner work items can race against workqueue destruction, leading to use-after-free conditions: cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__queue_work+0x83/0x4a0 Call Trace: <IRQ> __cfi_delayed_work_timer_fn+0x10/0x10 run_timer_softirq+0x3b6/0xbd0 sched_clock_cpu+0xc/0x110 irq_exit_rcu+0x18d/0x330 fred_sysvec_apic_timer_interrupt+0x5e/0x80 Fix this by ensuring strict ordering and proper serialization during teardown: 1. Move ucsi_unregister_partner() to the beginning of the teardown sequence and protect it under the connector mutex lock. 2. Ensure all pending partner tasks are explicitly flushed and finished before the workqueue is destroyed. 3. Switch from mod_delayed_work() to a cancel_delayed_work() and queue_delayed_work() sequence. This guarantees that items currently marked as pending won't be scheduled an additional time, preventing a double release of resources which leads to the following crash: Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP NOPTI Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker RIP: 0010:ucsi_poll_worker+0x65/0x1e0 Call Trace: <TASK> process_scheduled_works+0x218/0x6d0 worker_thread+0x188/0x3f0 __cfi_worker_thread+0x10/0x10 kthread+0x226/0x2a0 To ensure these rules are applied identically across both the normal teardown and the ucsi_init() error paths, consolidate the cleanup logic into a new helper, ucsi_unregister_port(). | ||||
| CVE-2026-74639 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-22 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-72139 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already has the required rcu member (include/net/tcp.h:1999-2002), and the rest of the tree already does this in the tcp_md5sig_info_add() rollback paths (net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done by tcp_clear_md5_list() in process context BEFORE the container's RCU grace period: it walks &md5sig->head and frees each tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact() (tcp_ipv4.c:1253, 1298) walks the same list via hlist_for_each_entry_rcu() and races with that bare kfree on the keys themselves -- a per-key slab use-after-free of the same class as the TCP-AO bug, on the same race window. Fix this in two halves: 1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the md5sig_info container joins the rest of the md5sig lifecycle. The local-variable lift is mechanical and required because kfree_rcu() is a macro that expects an lvalue. 2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del + kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct tcp_md5sig_key already carries the rcu member (include/net/tcp.h:1995) and tcp_md5_do_del() (net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this restores the lifecycle invariant the rest of the file follows rather than introducing a one-off. The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock() (net/ipv4/tcp.c:412), which runs from the sock destructor when the socket is already unhashed and unreachable; the extra grace period there is unnecessary but harmless. Making the helper unconditionally RCU-safe is the cleaner contract. The needs_ao branch is not reachable by the userns reproducer used to demonstrate the AO-side splat (the repro installs both keys but ends up in the needs_md5 branch because the connect peer matches the MD5 key, not the AO key); however the symmetric race exists and a maintainer touching this code should not have to think about which branch escapes RCU and which one does not. [also credits to Qihang, who found that this races with tcp-diag] | ||||
| CVE-2026-72212 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path. | ||||
| CVE-2026-72328 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential amdxdna_umap lifetime race amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove() before removing the object from abo->mem.umap_list. If aie2_populate_range() runs concurrently, it may obtain a reference to an amdxdna_umap that is being released, leading to a potential use-after-free. Use kref_get_unless_zero() in aie2_populate_range() when acquiring a reference. If the reference count has already dropped to zero, release is in progress and the entry is skipped. | ||||
| CVE-2026-72283 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a dangling pointer will result in a use-after-free if the irqfd is reachable through KVM's routing, but the producer is freed separately. E.g. for VFIO PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when the vector is disabled, which can happen independent of routing updates. [sean: drop PPC change, massage changelog] | ||||
| CVE-2026-72353 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | ||||