| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pistache is a high-performance REST toolkit written in C++. From 0.0.5 through 0.4.26, `SegmentTreeNode::sanitizeResource()` in `src/server/router.cc` uses `std::regex_replace()` with the `//+` expression to collapse consecutive slashes. With libstdc++, a path containing tens of thousands of consecutive slash characters can recurse deeply enough to exhaust the stack and crash the process. `Router::route()`, `Router::addRoute()` and `Router::removeRoute()` reach this normalization. Unauthenticated remote exploitation is conditional on a deployment allowing sufficiently long request paths, such as by increasing `Endpoint::Options::maxRequestSize()` above the default 4096-byte limit or forwarding long paths through a front end. Direct router API use is also affected when attacker-controlled route or resource strings reach the normalizer. Native builds reproduced a crash around 24,000 consecutive slashes, although the exact threshold depends on the stack and standard library; the demonstrated failure is stack exhaustion rather than uninitialized-memory use. A source fix replaces recursive regular-expression normalization with an iterative pass, but no containing repository release was verified as of time of publication. |
| Eclipse Langium versions 3.2.0 through 4.4.0 contain an inefficient algorithmic complexity issue (CWE-407) in the opt-in IndentationAwareTokenBuilder and IndentationAwareLexer. When producing DEDENT tokens, the token builder recomputes line numbers by re-scanning the entire preceding document text. A document whose indentation changes on most lines then takes quadratic time to tokenize. Because tokenization is synchronous, a crafted document of a few hundred kilobytes can block the Node.js event loop for tens of seconds. That causes a DoS for every user served by the same process. Languages built with the DefaultLexer and DefaultTokenBuilder are unaffected. |
| postal-mime before 4.2.1 contains an algorithmic complexity denial of service vulnerability that allows unauthenticated remote attackers to cause excessive CPU consumption in the PostalMime.processLine() function by crafting deeply nested multipart email messages with boundary lines sharing long prefixes with open boundaries. Attackers can deliver a malicious email with nesting up to the default maxNestingDepth of 256, causing per-line parsing cost to scale as O(depth x shared prefix length) and blocking the Node.js event loop for seconds per message. |
| In Progress® Telerik® UI for ASP.NET Core versions `2015.1.318` through `2026.3.811`, repeated server-side aggregation requests, with or without grouping, cause dynamic assemblies and load contexts to be retained, resulting in accumulating process memory consumption. An unauthenticated remote attacker can exploit this if the application exposes an aggregation endpoint that is reachable without authentication. Repeated requests can cause memory growth that may exhaust available resources and affect application availability. Disabling grouping in the client-side interface does not prevent direct requests containing these descriptors. The issue is fixed in version `2026.3.1015`. |
| In affected versions of Progress® Telerik® UI for ASP.NET MVC `2012.2.710` through `2026.3.811`, ClassFactory updates a shared class dictionary without exclusive write protection and emits non-collectible dynamic assemblies that remain loaded for the AppDomain's lifetime. The dictionary lookup and insertion are not atomic, and case variations in aggregate descriptors can produce distinct retained types even though member resolution is case-insensitive. An unauthenticated remote attacker can exploit this if the application exposes an aggregation endpoint that is reachable without authentication, by submitting concurrent or repeated crafted requests. These requests may corrupt dictionary state or increase CPU and memory use, potentially degrading availability. The issue is fixed in version `2026.3.1015`. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: prevent OGM aggregation on disabled hardif
When an interface gets disabled, the worker is correctly disabled by
batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable().
In this process, the skb aggr_list is also freed.
But batadv_v_ogm_send_meshif() can still queue new skbs (via
batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all
cores can no longer find the RCU protected list of hard interfaces. These
queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work.
The batadv_v_ogm_iface_disable() function must block
batadv_v_ogm_queue_on_if() to avoid leak of skbs. |
| Rack is a modular Ruby web server interface. Prior to 2.2.25, 3.1.23, and 3.2.8, Rack::Multipart::Parser can retain parsed data in its internal StringScanner buffer when reads end inside or immediately after multipart headers. An unauthenticated attacker can align many small parts with rack.multipart.buffer_size boundaries so the buffer grows with the request despite per-field, header, and preamble limits, causing a worker to exhaust memory. The attack requires only a well-formed multipart body and affects applications that parse multipart requests. This issue is fixed in versions 2.2.25, 3.1.23, and 3.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| When CONFIG_THREAD_STACK_MEM_MAPPED is enabled, each thread stack is mapped into the kernel virtual address space with a guard page on either side, and the mapping is released during abort cleanup. k_thread_abort_cleanup() in kernel/thread.c has two paths: a deferred one for self-abort, which stashes the mapping in thread_cleanup_stack_addr/thread_cleanup_stack_sz, and an immediate one for a thread aborted by some other thread. The immediate path called do_thread_cleanup(), which ignored its thread argument and only ever unmapped the stashed address — a value populated exclusively by the self-abort path. The mapped stack of a thread aborted by another thread was therefore never unmapped.
Every k_thread_abort() of a non-current thread leaks the thread's stack region plus its two guard pages from the kernel virtual address space. Threads that end by returning from their entry function take the working self-abort path, so the leak is specific to explicit cancellation — k_thread_abort(), pthread_cancel(), osThreadTerminate(), or the kernel thread kill shell command. Both k_thread_create() and k_thread_abort() are system calls, so with CONFIG_USERSPACE an unprivileged user-mode thread that has been granted a thread object and a user-capable stack object can drive the leak from user mode, consuming a kernel-side resource it cannot otherwise touch.
With CONFIG_KERNEL_VM_SIZE defaulting to 8 MB, a few hundred create/abort cycles exhaust the runtime mapping region. k_mem_map_phys_guard() then returns NULL, and map_thread_stack() guards that only with __ASSERT_NO_MSG(), which is compiled out of production builds; thread creation proceeds to write through a NULL-derived stack base and faults in kernel mode. The impact is a persistent denial of service — a kernel fatal error requiring a reboot — with no memory disclosure or corruption, and it is limited to configurations where memory-mapped thread stacks are enabled (x86 targets with X86_MMU and demand paging disabled, where the option is implied by default). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Fix IRQ domain leak when port fails to enable
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series. |
| Uncontrolled resource consumption in Windows Remote Procedure Call allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: clear freeze listener on node removal
Generally userspace is supposed to explicitly clear freeze listeners
before they drop the refcount on the node ref to zero, but there's
nothing forcing that. Currently, in this scenario the freeze listener
remains in the freeze_listeners rbtree and in the remote node's freeze
listener list, even though the ref for which the listener is registered
is gone. This could potentially lead to a memory leak due to a refcount
cycle. Thus, remove the freeze listener in this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: fix ring sg table pages leak
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction. |
| Inefficient algorithmic complexity in .NET allows an unauthorized attacker to deny service over a network. |
| IBM Db2 Genius Hub 1.1.2, 1.1.3, 1.1.4, 1.1.5 could allow a local attacker to cause a denial of service due to uncontrolled resource consumption. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document. |