Search Results (26769 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-68348 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in __blkdev_issue_zero_pages Move the fatal signal check before bio_alloc() to prevent a memory leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending. Previously, the bio was allocated before checking for a fatal signal. If a signal was pending, the code would break out of the loop without freeing or chaining the just-allocated bio, causing a memory leak. This matches the pattern already used in __blkdev_issue_write_zeroes() where the signal check precedes the allocation.
CVE-2025-23332 2 Linux, Nvidia 10 Linux, Display Driver, Driver and 7 more 2026-04-15 5 Medium
NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where an attacker might be able to trigger a null pointer deference. A successful exploit of this vulnerability might lead to denial of service.
CVE-2025-23345 3 Linux, Microsoft, Nvidia 3 Linux, Windows, Display Driver 2026-04-15 4.4 Medium
NVIDIA Display Driver for Windows and Linux contains a vulnerability in a video decoder, where an attacker might cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure or denial of service.
CVE-2022-50627 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix monitor mode bringup crash When the interface is brought up in monitor mode, it leads to NULL pointer dereference crash. This crash happens when the packet type is extracted for a SKB. This extraction which is present in the received msdu delivery path,is not needed for the monitor ring packets since they are all RAW packets. Hence appending the flags with "RX_FLAG_ONLY_MONITOR" to skip that extraction. Observed calltrace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000064 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000 [0000000000000064] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ath11k_pci ath11k qmi_helpers CPU: 2 PID: 1781 Comm: napi/-271 Not tainted 6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6 Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k] sp : ffff80000ef5bb10 x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0 x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000 x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600 x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006 x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143 x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8 x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052 Call trace: ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k] ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k] ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k] ath11k_dp_service_srng+0x234/0x338 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k] __napi_poll+0x5c/0x190 napi_threaded_poll+0xf0/0x118 kthread+0xf4/0x110 ret_from_fork+0x10/0x20 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
CVE-2025-71067 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ntfs: set dummy blocksize to read boot_block when mounting When mounting, sb->s_blocksize is used to read the boot_block without being defined or validated. Set a dummy blocksize before attempting to read the boot_block. The issue can be triggered with the following syz reproducer: mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0) r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0) ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000) mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00', &(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0) syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0) Here, the ioctl sets the bdev block size to 16384. During mount, get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)), but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves sb->s_blocksize at zero. Later, ntfs_init_from_boot() attempts to read the boot_block while sb->s_blocksize is still zero, which triggers the bug. [almaz.alexandrovich@paragon-software.com: changed comment style, added return value handling]
CVE-2022-50716 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 38.969959][ C3] Call Trace: [ 38.970841][ C3] <IRQ> [ 38.971663][ C3] dump_stack_lvl+0xfc/0x174 [ 38.972620][ C3] print_report.cold+0x2c3/0x752 [ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.974644][ C3] kasan_report+0xb1/0x1d0 [ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240 [ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0 [ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430 [ 38.981266][ C3] dummy_timer+0x140c/0x34e0 [ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0 [ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.986242][ C3] ? lock_release+0x51c/0x790 [ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70 [ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130 [ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 38.990777][ C3] ? lock_acquire+0x472/0x550 [ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.993138][ C3] ? lock_acquire+0x472/0x550 [ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230 [ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0 [ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0 [ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0 [ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0 [ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0 [ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10 [ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40 [ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0 [ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0 [ 39.016196][ C3] __do_softirq+0x1d2/0x9be [ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190 [ 39.019004][ C3] irq_exit_rcu+0x5/0x20 [ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0 [ 39.021965][ C3] </IRQ> [ 39.023237][ C3] <TASK> In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below (there are other functions which finally call ar5523_cmd()): ar5523_probe() -> ar5523_host_available() -> ar5523_cmd_read() -> ar5523_cmd() If ar5523_cmd() timed out, then ar5523_host_available() failed and ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb() might touch the freed structure. This patch fixes this issue by canceling in-flight tx cmd if submitted urb timed out.
CVE-2025-71069 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: f2fs: invalidate dentry cache on failed whiteout creation F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS assumes the entire rename operation failed and does not update the dentry cache, leaving stale mappings. In the error path, VFS does not call d_move() to update the dentry cache. This results in new_dentry still pointing to the old inode (new_inode) which has already had its i_nlink decremented to zero. The stale cache causes subsequent operations to incorrectly reference the freed inode. This causes subsequent operations to use cached dentry information that no longer matches the on-disk state. When a second rename targets the same entry, VFS attempts to decrement i_nlink on the stale inode, which may already have i_nlink=0, triggering a WARNING in drop_nlink(). Example sequence: 1. First rename (RENAME_WHITEOUT): file2 → file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 → inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented) 2. Second rename: file3 → file1 - VFS uses stale cache: file1 → inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink() Fix this by explicitly invalidating old_dentry and new_dentry when f2fs_add_link fails during whiteout creation. This forces VFS to refresh from disk on subsequent operations, ensuring cache consistency even when the rename partially succeeds. Reproducer: 1. Mount F2FS image with corrupted i_current_depth 2. renameat2(file2, file1, RENAME_WHITEOUT) 3. renameat2(file3, file1, 0) 4. System triggers WARNING in drop_nlink()
CVE-2022-50853 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a credential leak in _nfs4_discover_trunking()
CVE-2025-68767 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: hfsplus: Verify inode mode when loading from disk syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when the S_IFMT bits of the 16bits "mode" field loaded from disk are corrupted. According to [1], the permissions field was treated as reserved in Mac OS 8 and 9. According to [2], the reserved field was explicitly initialized with 0, and that field must remain 0 as long as reserved. Therefore, when the "mode" field is not 0 (i.e. no longer reserved), the file must be S_IFDIR if dir == 1, and the file must be one of S_IFREG/S_IFLNK/S_IFCHR/ S_IFBLK/S_IFIFO/S_IFSOCK if dir == 0.
CVE-2025-59691 2 Linux, Purevpn 2 Linux, Purevpn 2026-04-15 3.7 Low
PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0.
CVE-2022-50809 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: xhci: dbc: Fix memory leak in xhci_alloc_dbc() If DbC is already in use, then the allocated memory for the xhci_dbc struct doesn't get freed before returning NULL, which leads to a memleak.
CVE-2025-40049 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix uninit-value in squashfs_get_parent Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug. This is caused by open_by_handle_at() being called with a file handle containing an invalid parent inode number. In particular the inode number is that of a symbolic link, rather than a directory. Squashfs_get_parent() gets called with that symbolic link inode, and accesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent; Because non-directory inodes in Squashfs do not have a parent value, this is uninitialised, and this causes an uninitialised value access. The fix is to initialise parent with the invalid inode 0, which will cause an EINVAL error to be returned. Regular inodes used to share the parent field with the block_list_start field. This is removed in this commit to enable the parent field to contain the invalid inode number 0.
CVE-2025-40238 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec cleanup over MPV device When we do mlx5e_detach_netdev() we eventually disable blocking events notifier, among those events are IPsec MPV events from IB to core. So before disabling those blocking events, make sure to also unregister the devcom device and mark all this device operations as complete, in order to prevent the other device from using invalid netdev during future devcom events which could cause the trace below. BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 146427067 P4D 146427067 PUD 146488067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40 RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206 RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00 RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000 R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600 R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80 FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core] mlx5_devcom_send_event+0x8c/0x170 [mlx5_core] blocking_event+0x17b/0x230 [mlx5_core] notifier_call_chain+0x35/0xa0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core] mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib] mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib] ? idr_alloc_cyclic+0x50/0xb0 ? __kmalloc_cache_noprof+0x167/0x340 ? __kmalloc_noprof+0x1a7/0x430 __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe9/0x310 [mlx5_ib] ? kernfs_add_one+0x107/0x150 ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] auxiliary_bus_probe+0x3e/0x90 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x62d/0x830 __auxiliary_device_add+0x3b/0xa0 ? auxiliary_device_init+0x41/0x90 add_adev+0xd1/0x150 [mlx5_core] mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core] esw_mode_change+0x6c/0xc0 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x170/0x170 ? devlink_nl_eswitch_get_doit+0x290/0x290 ? devlink_nl_pre_doit_port_optional+0x50/0x50 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __sys_recvmsg+0x4e/0x90 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f27bc91b13a Code: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff ---truncated---
CVE-2022-50642 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: zero out stale pointers `cros_typec_get_switch_handles` allocates four pointers when obtaining type-c switch handles. These pointers are all freed if failing to obtain any of them; therefore, pointers in `port` become stale. The stale pointers eventually cause use-after-free or double free in later code paths. Zeroing out all pointer fields after freeing to eliminate these stale pointers.
CVE-2025-40221 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: media: pci: mg4b: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `scan` structure is zeroed before use.
CVE-2025-40085 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card In try_to_register_card(), the return value of usb_ifnum_to_if() is passed directly to usb_interface_claimed() without a NULL check, which will lead to a NULL pointer dereference when creating an invalid USB audio device. Fix this by adding a check to ensure the interface pointer is valid before passing it to usb_interface_claimed().
CVE-2023-54253 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: btrfs: set page extent mapped after read_folio in relocate_one_page One of the CI runs triggered the following panic assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 sp : ffff800093213720 x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000 x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880 x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028 x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000 x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8 x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_set_dirty+0x38/0xa0 btrfs_page_set_dirty+0x58/0x88 relocate_one_page+0x204/0x5f0 relocate_file_extent_cluster+0x11c/0x180 relocate_data_extent+0xd0/0xf8 relocate_block_group+0x3d0/0x4e8 btrfs_relocate_block_group+0x2d8/0x490 btrfs_relocate_chunk+0x54/0x1a8 btrfs_balance+0x7f4/0x1150 btrfs_ioctl+0x10f0/0x20b8 __arm64_sys_ioctl+0x120/0x11d8 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x158 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000) This is the same problem outlined in 17b17fcd6d44 ("btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the fix is the same. I originally looked for the same pattern elsewhere in our code, but mistakenly skipped over this code because I saw the page cache readahead before we set_page_extent_mapped, not realizing that this was only in the !page case, that we can still end up with a !uptodate page and then do the btrfs_read_folio further down. The fix here is the same as the above mentioned patch, move the set_page_extent_mapped call to after the btrfs_read_folio() block to make sure that we have the subpage blocksize stuff setup properly before using the page.
CVE-2023-54183 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link() If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos.
CVE-2025-40339 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved.
CVE-2025-40234 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers Devices without the AWCC interface don't initialize `awcc`. Add a check before dereferencing it in sleep handlers.