Export limit exceeded: 11802 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (427887 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-91141 | 1 Covesa | 1 Vsomeip | 2026-11-17 | 7.5 High |
| A vulnerability in the default configuration of vsomeip allows a remote, unauthenticated attacker to trigger massive memory allocations by sending a small TCP packet with a large, attacker-declared SOME/IP length field. This can lead to immediate service termination via OOM-kill on memory-constrained systems or total host memory exhaustion through repeated connections. | ||||
| CVE-2026-110789 | 2026-11-17 | 7.5 High | ||
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 5.1.22, the @libp2p/crypto code reached by the default Identify service accepts a remote peer’s crafted publicKey before peer-id or signature verification and passes it through publicKeyFromProtobuf to the ASN.1 DER decoder. readLength in packages/crypto/src/keys/rsa/der.ts accepts long-form element lengths larger than the remaining buffer, causing readInteger and related readers to loop synchronously over an attacker-claimed length from a very small key blob. Because decoding occurs in one event-loop tick before the remotePeer equality check in packages/protocol-identify/src/identify.ts, the Identify timeout cannot interrupt it, allowing repeated unauthenticated connections to stall all timers and peers and transiently exhaust memory. This issue is fixed in version 5.1.22. | ||||
| CVE-2026-64555 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM. | ||||
| CVE-2026-119793 | 2026-11-17 | 7.5 High | ||
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 17.0.0, the @libp2p/gossipsub default configuration allows a connected remote peer to submit unsigned subscription RPC metadata for arbitrarily many distinct topic strings. handleReceivedSubscription in packages/gossipsub/src/gossipsub.ts creates a persistent topics-map entry for each accepted topic, while allowedTopics is unset by default, decodeRpc maxSubscriptions limits only one RPC rather than aggregate topic bytes, and peer scoring has no subscription-volume penalty. A single peer can therefore grow the topics map and committed heap toward out-of-memory conditions, and disconnecting additionally causes removePeer to scan all accumulated topic entries. This issue is fixed in version 17.0.0. | ||||
| CVE-2022-4994 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: wean fast IN from emulator_pio_in Use __emulator_pio_in() directly for fast PIO instead of bouncing through emulator_pio_in() now that __emulator_pio_in() fills "val" when handling in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a pure nop. emulator_pio_in_emulated is now the last caller of emulator_pio_in. No functional change intended. | ||||
| CVE-2026-64565 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well] | ||||
| CVE-2026-64566 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags() When iptfs_skb_add_frags() copies frag references from the source frag walk into a new SKB, it increments the page reference count via __skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the destination SKB's skb_shinfo->flags. If the source SKB carries shared frags (e.g. from a page-pool backed receive path), the new inner SKB will appear to ESP as having privately owned frags. A subsequent esp_input() call for a nested transport-mode SA then takes the no-COW fast path and decrypts in place, writing over pages that are still referenced by the outer IPTFS SKB. This causes kernel-visible memory corruption and can trigger a panic. All other frag-transfer helpers in the kernel (skb_try_coalesce, skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this convention by setting the flag inside the loop immediately after __skb_frag_ref() and nr_frags++, so every exit path that attaches a frag unconditionally propagates SKBFL_SHARED_FRAG. | ||||
| CVE-2026-64568 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points at the object already queued for freeing. A later update or AP teardown re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). | ||||
| CVE-2026-64569 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does. | ||||
| CVE-2026-64571 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying. | ||||
| CVE-2026-124911 | 1 Mozilla | 1 Firefox | 2026-11-17 | 5.4 Medium |
| Clickjacking issue in the Autofill component in Firefox for Android. This vulnerability was fixed in Firefox 160. | ||||
| CVE-2026-123790 | 1 Comfyui-easy-use | 1 Comfyui-easy-use | 2026-11-17 | 6.5 Medium |
| ComfyUI-Easy-Use version 1.3.6 contains a path traversal vulnerability in the `save_preview()` handler for POST `/easyuse/save/{name}`. The handler checks the source directory before appending a user-supplied filename and allows the request to select the `custom_nodes` directory as a copy destination. An unauthenticated attacker who can reach the ComfyUI server can overwrite an installed custom node’s Python entry point with an uploaded file. When ComfyUI restarts and loads the modified node, the attacker’s code runs with the privileges of the ComfyUI process. | ||||
| CVE-2026-126557 | 1 Broadcom | 2 Autosys Workload Automation, Ca Workload Automation Ae | 2026-11-17 | N/A |
| Out-of-bounds Write vulnerability in Broadcom AutoSys Workload Automation (AutoSys engine (AE) native clients modules) on Windows, Linux allows Overflow Buffers.This issue affects AutoSys Workload Automation: from 12.1.00.00-0305 through 24.2.00-0210. | ||||
| CVE-2026-69241 | 2026-11-17 | 5.4 Medium | ||
| Filament Curator is a media picker plugin for Filament panels. From 3.0.0 until 3.7.9, 4.1.2, and 5.1.2, the Curator media panel accepts image/svg+xml files by default and stores and serves their markup inline without sanitization. An authenticated user with media-upload permission can store an SVG containing scripts, event-handler attributes, or javascript: URIs. When another panel user selects the View action, the SVG opens as a top-level browser document and its active content executes in the Filament application's origin. The script can perform authenticated same-origin actions as the viewing user and read same-origin data and script-accessible tokens. Panel thumbnails are not affected because they render through an image element that does not execute SVG script. This issue is fixed in versions 3.7.9, 4.1.2, and 5.1.2. | ||||
| CVE-2026-106807 | 1 Open5gs | 1 Open5gs | 2026-11-17 | 5.3 Medium |
| A denial-of-service vulnerability exists in open5GS v2.8.0 in the PFCP transaction handling path. When the PFCP transaction or timer resource pool is exhausted, ogs_pfcp_xact_remote_create() returns NULL, but the failure is not handled properly and leads to an ogs_assert(new) failure in ogs_pfcp_xact_receive(). An attacker able to send PFCP messages to the affected SMF/UPF can exhaust transaction resources and cause the network function process to terminate with SIGABRT, resulting in service disruption and preventing further session establishment until the affected component is restarted. | ||||
| CVE-2026-124938 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-11-17 | 5.4 Medium |
| Mitigation bypass in the Add-ons Manager component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. | ||||
| CVE-2026-44929 | 1 Apache | 1 Xml Graphics Batik | 2026-11-17 | 7.5 High |
| Server-Side Request Forgery (SSRF) vulnerability in Apache XML Graphics Batik. This issue affects Apache XML Graphics Batik: through 1.19. Users are recommended to upgrade to version 1.20, which fixes the issue. | ||||
| CVE-2026-71395 | 2026-11-17 | 9.8 Critical | ||
| unsafe deserialization in hyphenation loading vulnerability in Apache XML Graphics FOP. This issue affects Apache XML Graphics FOP: through 2.11. Users are recommended to upgrade to version 2.12, which fixes the issue. | ||||
| CVE-2026-89326 | 1 Apache | 1 Xml Graphics Batik | 2026-11-17 | 5.3 Medium |
| Origin Validation Error vulnerability in Apache XML Graphics Batik: the external resource same-origin check does not compare the URL protocol This issue affects Apache XML Graphics Batik: through 1.19. Users are recommended to upgrade to version 1.20, which fixes the issue. | ||||
| CVE-2026-15465 | 1 Imaginationtech | 1 Graphics Ddk | 2026-11-17 | 7.8 High |
| Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot. The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations. | ||||