| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts.
The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once.
This issue affects nerves_hub: from 1.0.0 before 2.5.4. |
| An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected. |
| The Bluetooth Classic SDP client built its outgoing request PDUs with bt_sdp_create_pdu(), which allocates from the sdp_pool net-buf pool with a K_FOREVER timeout and no failure handling, in sdp_client_ss_search(), sdp_client_sa_search() and sdp_client_ssa_search() in subsys/bluetooth/host/classic/sdp.c. All of these run on the Bluetooth workqueue bt_workq (via sdp_client_work_handler(), the L2CAP sdp_client_connected() callback, or the continuation-state follow-up from a received response), which is the same single thread that dispatches incoming HCI ACL and event traffic, drives L2CAP, and performs connection and channel teardown. sdp_pool holds only CONFIG_BT_MAX_CONN buffers (one by default) and is shared with the SDP server role.
An unauthenticated peer within BR/EDR range can drive both halves of the trigger. The SDP L2CAP server is registered at BT_SECURITY_L0, so any inbound SDP request makes the device allocate the pool's buffer for a response, which is held until the controller has transmitted it. The same peer can then cause a client request to be issued while the pool is empty: in-tree profiles start SDP discovery from inbound connection callbacks (for example hfp_hf_accept() calls bt_sdp_discover() through hfp_hf_create(), and hfp_ag.c mirrors this), and a peer acting as an SDP server can force repeated client requests by answering with partial responses carrying continuation state.
With the pool empty, the allocation blocks uninterruptibly and freezes the entire Bluetooth host. The stall becomes permanent when the release of the outstanding buffer itself depends on the blocked workqueue: if the link carrying the queued PDU is dropped or stalls, hci_disconn_complete() and the L2CAP channel cleanup that purges the channel TX queue are themselves bt_workq work items, so the buffer is never returned. The result is an unrecoverable denial of service of all Bluetooth functionality until reboot; there is no memory-safety, confidentiality or integrity impact.
The fix allocates client PDUs with K_NO_WAIT via a new sdp_client_create_pdu(), propagates -ENOBUFS, parks the session on a new SDP_CLIENT_FLAG_WAIT_FOR_TX_BUF flag, and adds an sdp_pool destructor that re-submits the SDP client worker when a buffer becomes available. Note that the SDP server role still allocated from the same pool with K_FOREVER at this commit; that path was addressed separately. |
| The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound.
The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation.
A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved.
The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback. |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order
is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely.
Impact summary: An attacker able to supply the recipient certificate to an
application performing CMS encryption can cause that application to loop
indefinitely, consuming CPU and resulting in Denial of Service.
CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or
more recipient certificates and, for an EC recipient, generate an ephemeral
key in the recipient's group. If the certificate declares a group order of 1,
random scalar generation can only produce zero. The key generation routine
then retries without limit while waiting for a nonzero private scalar, so the
call never returns.
The OpenSSL TLS and QUIC implementations do not use this path. An application
is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient
certificate whose EC parameters are attacker-controlled. Certificates with
normal EC group orders do not trigger the loop.
OpenSSL 4.0 and later reject unknown explicit EC groups in default builds.
These versions are affected only when configured with the
enable-ec_explicit_curves option.
The result is a hang that consumes a CPU core until the process is
interrupted, a Denial of Service. The severity is Low because the attacker
must supply the recipient certificate and the application must choose to
encrypt to it; ordinary CMS encryption to trusted recipients is unaffected.
The fix makes EC key generation fail when the group has no valid nonzero
private scalar, instead of retrying indefinitely.
FIPS impact: no
The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider
does not support arbitrary explicit EC domain parameters, so an order-1 group
is rejected during key import before the vulnerable key generation path is
reached. |
| Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process. |
| In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled. |
| The Jakarta Security identity store backed by the Tomcat user database compares the supplied password with the stored value as plain text and ignores the configured credential handler. When digested passwords are stored, an attacker who obtained a stored digest, for example from a leaked users file or backup, can authenticate with the digest instead of the password. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue. |
| An inclusion of web functionality from an untrusted source could allow remote code execution on SpaceCom |
| In the NAS Authentication Request message decoding procedure, a missing lower bound check causes an infinite loop, leading to Denial of Service. |
| Deadlock for some Intel(R) Arc(TM) B-series graphics cards within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in elixir-grpc grpc_server and grpc allows unauthenticated attackers to occupy a BEAM scheduler indefinitely via a client-streaming or bidirectional-streaming request whose body ends inside a gRPC message.
GRPC.Server.Adapters.Cowboy.read_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex, and the Cowboy adapter in grpc before the package split) asks for more data whenever the buffer does not hold a complete message. Once the request body has ended, every further read returns an empty chunk, so the buffer never changes and the function retries without end. A single 5-byte length prefix sent with END_STREAM keeps one scheduler busy for as long as the connection stays open, and repeated requests exhaust all schedulers.
This issue affects grpc_server: from 1.0.0 before 1.1.0; grpc: from 0.3.1 before 1.0.0. |
| A weakness has been identified in Akaunting up to 3.3.0. The affected element is the function calculation_to_quantity of the file helpers.php of the component Invoice Item Validation. Executing a manipulation of the argument quantity can lead to numeric range comparison without minimum check. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. |
| Action Pack is a framework for handling and responding to web requests. Prior to 8.1.4.1 and 8.0.5.2, ActionController::Live::Buffer#close pushes its end-of-stream marker onto the response's bounded queue while it holds the buffer's monitor. When the client has stopped reading and the queue is full, the push blocks, and Buffer#abort, which runs when the client disconnects or a write times out, waits indefinitely for the same monitor. Each such response could permanently hold a web server thread and its ActionController::Live thread, possibly resulting in a DoS vulnerability through thread exhaustion. Applications that stream responses with ActionController::Live, including send_stream, are affected. Applications that serve large files through Active Storage proxy mode are exposed to unauthenticated clients. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| The AVRCP browsing channel's L2CAP receive-buffer callback, browsing_avrcp_l2cap_alloc_buf() in subsys/bluetooth/host/classic/avrcp.c, allocated from the shared avctp_browsing_rx_pool with K_FOREVER. L2CAP invokes that callback from the Bluetooth RX work queue thread (bt_workq, "BT RX WQ"), both for the head buffer of a new SDU and — through l2cap_br_alloc_frag() and net_buf_append_bytes() — for every further fragment of a reassembled SDU. That same thread is the only context that ever releases these buffers, after bt_l2cap_br_recv_seg() delivers a completed SDU and calls net_buf_unref(), so a wait taken there can never be satisfied.
The pool holds CONFIG_BT_MAX_CONN + 1 buffers of CONFIG_BT_AVRCP_BROWSING_L2CAP_MTU bytes (two buffers of 339 bytes in the default configuration). A connected browsing peer can drain it because bt_l2cap_br_recv_seg() in subsys/bluetooth/host/classic/l2cap_br.c accepts the SDU length declared in an SAR_START segment without bounding it by br_chan->rx.mtu: a peer that announces a large SDU and then streams continuation segments forces one pool buffer per segment-worth of data. Once the pool is empty the next allocation blocks forever inside the callback.
Triggering the flaw requires a build with CONFIG_BT_CLASSIC and the experimental CONFIG_BT_AVRCP_BROWSING option, an application that registers AVRCP callbacks, and a BR/EDR peer that has established the AVRCP control channel and then the browsing channel, which requires an encrypted (paired) link. No malformed packet is needed — a few hundred bytes of ordinary segmented L2CAP traffic suffice.
The consequence is a permanent hang of the whole Bluetooth host, not just of AVRCP: the blocked thread drains bt_dev.rx_queue for all HCI ACL data and low-priority events and also runs the host's internal work items, so all connections stop being serviced and the state is unrecoverable without a reboot. There is no memory-corruption or information-disclosure component. The fix allocates with K_NO_WAIT, so an empty pool now yields a local-busy indication or a channel disconnect that the application can recover from. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, when the pipelined request queue is full, the pure-Python parser stores the unparsed remainder internally and also returns the same data to its caller. After a handler declines an upgrade request, the caller feeds the remainder back to the parser, causing the buffer to grow with each handled request and dispatching already-handled requests to the application again. The issue affects deployments using AIOHTTP_NO_EXTENSIONS or otherwise running without the standard C-extension wheel, and can cause excessive memory use and repeated request processing. This issue is fixed in version 3.14.4. |
| A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests. |