Export limit exceeded: 430550 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 430550 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (430550 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99678 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before.
CVE-2026-99680 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: mark the inode preallocated for pNFS write layouts past EOF xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it allocates blocks for a write layout. A write layout past EOF can also hand out allocated blocks, such as speculative preallocation. blockgc then frees them under the layout, and another file may get them. Mark the inode whenever a write mapping ends past EOF.
CVE-2026-96541 2 Gnome, Redhat 4 Gnome-remote-desktop, Enterprise Linux, Enterprise Linux Eus and 1 more 2026-11-20 7.5 High
A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed.
CVE-2026-131277 1 Splunk 1 Splunk 2026-11-20 6.3 Medium
In Splunk SOAR versions below 8.8.0, a user that holds a role with permission to edit playbooks and repositories could store a modified utility block in a playbook. If a user that holds a role with permission to edit playbook code later opens and saves the playbook in the Visual Playbook Editor, a subsequent playbook run could send a Representational State Transfer (REST) API delete request to a resource outside the intended data list. The user account that runs the playbook must have permission to delete the target resource. The vulnerability is possible because Splunk SOAR does not prevent a utility block from changing the intended REST API request path. For more information see Data management automation API (https://help.splunk.com/en/splunk-soar/soar-on-premises/python-playbook-api-reference/6.3.0/automation-api/data-management-automation-api) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.
CVE-2026-131292 1 Splunk 1 Splunk 2026-11-20 6.5 Medium
In Splunk SOAR versions below 8.8.0, a user who can edit and run a playbook on a permitted label could cause Splunk SOAR to return custom-function status and callback state from another playbook run. The issue results from insufficient binding between a custom-function-status request and the playbook run that initiates it.
CVE-2026-62955 1 Baserproject 1 Basercms 2026-11-20 7.2 High
baserCMS is a website development framework. From 5.2.3 until 5.3.0, BcThemeFileService::getFullpath() in plugins/bc-theme-file/src/Service/BcThemeFileService.php skips its path containment check when realpath() fails for a nonexistent theme subdirectory selected by the type parameter. An authenticated administrator can supply a traversal path through the theme-file API to access locations outside the theme directory. The bypass of the CVE-2026-30940 fix can permit file writes, overwrites or deletion within the PHP process permissions and, where executable PHP can be written, remote code execution. This issue is fixed in 5.3.0.
CVE-2026-130163 1 Collaboraoffice 1 Online 2026-11-20 N/A
Collabora Online is a collaborative online office suite based on LibreOffice technology. Prior to 24.04.19.3, 25.04.13.3, and 26.04.3.3, the RouteToken query parameter is reflected into the unauthenticated admin-console page without HTML encoding. The admin-console page is served without authentication. A victim must load a crafted URL, and token exposure requires the victim to be an administrator already signed in to the console; the reflected value can run script in the Collabora Online origin and expose the console authentication token. This issue is fixed in versions 24.04.19.3, 25.04.13.3, and 26.04.3.3.
CVE-2026-99594 1 Linux 2 Linux, Linux Kernel 2026-11-20 2.3 Low
In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [catalin.marinas@arm.com: drop the redundant NULL check before vfree()]
CVE-2026-99595 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear throttle state when leaving the fair class Task-based CFS bandwidth throttling removes a task's fair sched_entity while the scheduler core still considers the task queued. p->throttled carries the fair-specific state across dequeue/enqueue operations. DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list but retains the bit. If the last finite CFS quota is disabled while the task runs in another class, it is absent from the unthrottle walk and the bit survives. Returning to fair while cfs_bandwidth_used() is false then performs a real fair enqueue with p->throttled still set. After bandwidth is re-enabled, a class-change dequeue treats the stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore remains set, and put_prev_task_fair() places the entity in the EEVDF tree while the task moves to RT. On exit, the fair picker can select the TASK_DEAD task. __schedule() then returns to do_task_dead(), which hits BUG(). Keep p->throttled across migrations and group moves, but clear it on DEQUEUE_CLASS because fair-specific state must not outlive fair-class membership. A later return to fair uses the normal enqueue path. That path still respects a throttled cfs_rq. A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead() BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch control with bandwidth continuously enabled, without a scheduler warning, KASAN report, lockdep splat or crash. An AI coding assistant analyzed the state mismatch and drafted the initial reproducer, fix candidate and this changelog. The source paths, trigger, controls and results were rechecked against the cited revisions.
CVE-2026-99621 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: unlock the VM and BO when attaching a KFD BO fails kfd_mem_attach() locks the page directory and the BO with a drm_exec transaction on its stack, but leaves through the unwind label without drm_exec_fini() when locking fails, e.g. when MAP_MEMORY_TO_GPU gets a signal while the page directory or the BO is busy. Reservations already acquired then remain locked with their ww_acquire_ctx pointing into the expired stack frame. With one thread doing GEM_VA map/unmap on the KFD VM and another one mapping KFD BOs while getting SIGUSR1 every 20 us: BUG: KASAN: stack-out-of-bounds in __ww_mutex_lock.constprop.0+0x34f5/0x3da0 ww_mutex_lock_interruptible+0x2f/0x150 drm_exec_lock_obj+0x107/0x2d0 [drm_exec] kfd_mem_attach+0x4dd/0x1b60 [amdgpu] and the process ends up in D state. Finish the transaction before unwinding. (cherry picked from commit 7b885fa27e4b9fa5cbdc64e66fc35872aee296f5)
CVE-2026-99623 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Clamp the ATIF backlight curve to its 99 points amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points as data_points but copies only the 99 points that luminance_data[] holds. number_of_points is a u8, so a firmware table that claims more makes the custom curve code in amdgpu_dm index past the array, and dm_query_extended_brightness_caps() copy past the end of the data_points[] buffer it fills Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table that claims more is a firmware bug (cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072)
CVE-2026-99632 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)
CVE-2026-99657 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]
CVE-2026-84838 1 Redhat 5 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 2 more 2026-11-20 7.8 High
A flaw was found in rpmuncompress. This command injection vulnerability allows a local attacker to execute arbitrary commands. This occurs when rpmuncompress processes a specially crafted archive filename containing shell metacharacters, which are not properly escaped before being passed to shell command strings. Successful exploitation requires user interaction, where a user or automated workflow invokes rpmuncompress on the malicious file, leading to high impact on the confidentiality, integrity, and availability of data accessible to the invoking user.
CVE-2026-84233 1 Redhat 5 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 2 more 2026-11-20 7 High
A flaw was found in rpm. A local attacker could supply a specially crafted `.gem` filename containing RPM macro syntax. When a user or automated workflow invokes `rpmuncompress -x` on this file, the macro expansion occurs during command construction. This allows the attacker to execute arbitrary commands with the privileges of the invoking account, leading to a compromise of confidentiality, integrity, and availability.
CVE-2026-84837 1 Redhat 7 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 4 more 2026-11-20 7.8 High
A flaw was found in rpm. An attacker can exploit a command injection vulnerability by influencing the path or filename of a tarball processed by `rpmbuild -t*` to include shell metacharacters. This is particularly relevant in automated build or continuous integration (CI) workflows that ingest externally supplied artifact names. Successful exploitation allows for arbitrary command execution with the privileges of the build user, which could lead to information disclosure or disruption of the build environment.
CVE-2026-78367 1 Redhat 6 Enterprise Linux, Enterprise Linux Eus, Hummingbird and 3 more 2026-11-20 7 High
A vulnerability was found in RPM's rpmbuild tarball processing. When processing a crafted source archive, the getTarSpec() function in tools/rpmbuild.cc passes an attacker-controlled tar archive member name to rpmExpand() as part of a %{basename:...} macro expression. A specially crafted .spec member name can therefore inject RPM macros, including Lua expressions, resulting in arbitrary code execution with the privileges of the user running rpmbuild. This can be exploited when a victim or automated build system processes an attacker-controlled source tarball using rpmbuild tarball mode (such as -ts, -ta, or -tb).
CVE-2026-119528 2 Red Hat, Redhat 4 Enterprise Linux, Enterprise Linux, Rhel Els and 1 more 2026-11-20 7.8 High
A flaw was found in GIMP. The PSD plug-in’s image resource header loader uses an incorrect destination size when copying a converted resource name into a fixed stack buffer. Opening a crafted PSD file can cause a stack-based buffer overflow, leading to a crash and potentially arbitrary code execution.
CVE-2026-97024 2 Flatpak, Redhat 8 Flatpak, Enterprise Linux, Enterprise Linux Eus and 5 more 2026-11-20 7.1 High
A path traversal vulnerability in Flatpak's handling of the files/etc directory during app deployment allows a malicious Flatpak app to cause certain host system files (such as passwd, group, machine-id, or resolv.conf) to be emptied or replaced with a symlink when the app is installed or upgraded. In system-wide installations, the write is performed as root.
CVE-2026-97023 2 Flatpak, Redhat 8 Flatpak, Enterprise Linux, Enterprise Linux Eus and 5 more 2026-11-20 7.1 High
A path traversal vulnerability in Flatpak's handling of the export/bin directory during app deployment allows a malicious Flatpak app to cause deletion of attacker-chosen files outside the deployment directory when the app is installed or upgraded. In system-wide installations, the deletion is performed as root.