Export limit exceeded: 24723 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24723 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59730 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it. Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution. This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow. process_frame_obj initializes the buffers based on the frame resolution: We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-37129 | 2 Arubanetworks, Hp | 2 Edgeconnect Enterprise, Arubaos | 2026-04-15 | 6.7 Medium |
| A vulnerable feature in the command line interface of EdgeConnect SD-WAN could allow an authenticated attacker to exploit built-in script execution capabilities. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system if the feature is enabled without proper security measures. | ||||
| CVE-2025-6559 | 2026-04-15 | 9.8 Critical | ||
| Multiple wireless router models from Sapido have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. The affected models are out of support; replacing the device is recommended. | ||||
| CVE-2021-4470 | 2 Tg8, Togrow | 2 Tg8 Firewall, Tg8 Firewall | 2026-04-15 | N/A |
| TG8 Firewall contains a pre-authentication remote code execution vulnerability in the runphpcmd.php endpoint. The syscmd POST parameter is passed directly to a system command without validation and executed with root privileges. A remote, unauthenticated attacker can supply crafted values to execute arbitrary operating system commands as root, resulting in full device compromise. | ||||
| CVE-2010-10013 | 1 Ajaxplorer | 1 Ajaxplorer | 2026-04-15 | N/A |
| An unauthenticated remote command execution vulnerability exists in AjaXplorer (now known as Pydio Cells) versions prior to 2.6. The flaw resides in the checkInstall.php script within the access.ssh plugin, which fails to properly sanitize user-supplied input to the destServer GET parameter. By injecting shell metacharacters, remote attackers can execute arbitrary system commands on the server with the privileges of the web server process. | ||||
| CVE-2025-10589 | 1 N-partner | 3 N-cloud, N-probe, N-reporter | 2026-04-15 | 8.8 High |
| The N-Reporter, N-Cloud, and N-Probe developed by N-Partner has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the server. | ||||
| CVE-2024-57595 | 1 Dlink | 1 Dir-825 | 2026-04-15 | 9.8 Critical |
| DLINK DIR-825 REVB 2.03 devices have an OS command injection vulnerability in the CGl interface apc_client_pin.cgi, which allows remote attackers to execute arbitrary commands via the parameter "wps_pin" passed to the apc_client_pin.cgi binary through a POST request. | ||||
| CVE-2024-47133 | 1 Iodata | 2 Ud-lt1\/ex Firmware, Ud-lt1 Firmware | 2026-04-15 | N/A |
| UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands. | ||||
| CVE-2025-2983 | 2026-04-15 | 5.5 Medium | ||
| A vulnerability has been found in Legrand SMS PowerView 1.x and classified as critical. Affected by this vulnerability is an unknown functionality. The manipulation of the argument redirect leads to os command injection. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-34049 | 2026-04-15 | N/A | ||
| An OS command injection vulnerability exists in the OptiLink ONT1GEW GPON router firmware version V2.1.11_X101 Build 1127.190306 and earlier. The router’s web management interface fails to properly sanitize user input in the target_addr parameter of the formTracert and formPing administrative endpoints. An authenticated attacker can inject arbitrary operating system commands, which are executed with root privileges, leading to remote code execution. Successful exploitation enables full compromise of the device. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC. | ||||
| CVE-2025-5943 | 1 Microdicom | 1 Dicom Viewer | 2026-04-15 | 8.8 High |
| MicroDicom DICOM Viewer suffers from an out-of-bounds write vulnerability. Remote attackers are able to exploit this issue to potentially execute arbitrary code on affected installations of DICOM Viewer. User interaction is required to exploit the vulnerability in that the user must either visit a malicious website or open a malicious DICOM file locally. | ||||
| CVE-2025-47203 | 1 Dropbear Ssh Project | 1 Dropbear Ssh | 2026-04-15 | 4.5 Medium |
| dbclient in Dropbear SSH before 2025.88 allows command injection via an untrusted hostname argument, because a shell is used. | ||||
| CVE-2025-50121 | 2026-04-15 | N/A | ||
| A CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause unauthenticated remote code execution when a malicious folder is created over the web interface HTTP when enabled. HTTP is disabled by default. | ||||
| CVE-2025-6193 | 1 Redhat | 1 Openshift Ai | 2026-04-15 | 5.9 Medium |
| A command injection vulnerability was discovered in the TrustyAI Explainability toolkit. Arbitrary commands placed in certain fields of a LMEValJob custom resource (CR) may be executed in the LMEvalJob pod's terminal. This issue can be exploited via a maliciously crafted LMEvalJob by a user with permissions to deploy a CR. | ||||
| CVE-2025-65001 | 1 Fujitsu | 1 Fbiosdrv | 2026-04-15 | 8.2 High |
| Fujitsu fbiosdrv.sys before 2.5.0.0 allows an attacker to potentially affect system confidentiality, integrity, and availability. | ||||
| CVE-2024-53942 | 2026-04-15 | 4.8 Medium | ||
| An issue was discovered on NRadio N8-180 NROS-1.9.2.n3.c5 devices. The /cgi-bin/luci/nradio/basic/radio endpoint is vulnerable to command injection via the 2.4 GHz and 5 GHz name parameters, allowing a remote attacker to execute arbitrary OS commands on the device (with root-level permissions) via crafted input. | ||||
| CVE-2024-53940 | 1 Victure | 1 Rx1800 Firmware | 2026-04-15 | 8.8 High |
| An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device. | ||||
| CVE-2024-1624 | 2026-04-15 | 9.4 Critical | ||
| An OS Command Injection vulnerability affecting documentation server on 3DEXPERIENCE from Release 3DEXPERIENCE R2022x through Release 3DEXPERIENCE R2024x, SIMULIA Abaqus from Release 2022 through Release 2024, SIMULIA Isight from Release 2022 through Release 2024 and CATIA Composer from Release R2023 through Release R2024. A specially crafted HTTP request can lead to arbitrary command execution. | ||||