Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429899 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-69133 1 Netty 1 Netty-incubator-codec-ohttp 2026-11-20 5.3 Medium
netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. From 0.0.20.Final until 0.0.27.Final, OHttpClientCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpClientCodec.java and OHttpServerCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpServerCodec.java retain the consumed outer cumulationBuffer after a valid OHTTP exchange completes, even though OHttpRequestResponseContext.destroy in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java releases the inner Binary HTTP cumulation and the channel remains active. A peer can complete a large request or response and leave the keep-alive connection idle, causing the client and server handlers to retain the current high-water pooled or direct buffer capacity until later inbound content replaces it or the handler is removed. Many long-lived idle connections can pin substantial memory and create availability pressure. The issue does not cause unbounded growth for repeated exchanges on a single channel. This issue is fixed in version 0.0.27.Final.
CVE-2026-118233 2 Apache, Apache Software Foundation 3 Apache Tomcat, Tomcat, Tomcat 2026-11-20 N/A
Allocation of resources without limits or throttling vulnerability in Apache Tomcat during HTTP upgrade in some circumstances lead to possible DoS. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.41 through 9.0.123. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.61 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fix the issue. Note: Tomcat 11.0.28 was not released
CVE-2026-118436 2 Apache, Apache Software Foundation 3 Apache Tomcat, Tomcat, Tomcat 2026-11-20 5.9 Medium
Allocation of resources without limits or throttling vulnerability in Apache Tomcat in the CGI Servlet when handling POST bodies can result in a DoS for some inputs. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.0.M1 through 9.0.123. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fix the issue. Note: Tomcat 11.0.28 was not released
CVE-2026-133325 2 Apache, Apache Software Foundation 3 Apache Tomcat, Tomcat, Tomcat 2026-11-20 8.1 High
Key exchange without entity authentication vulnerability in Apache Tomcat allowed an unauthenticated node to join a cluster when the cluster was secured with TLS 1.3 and TLS-PSK. This issue affects Apache Tomcat: 11.0.29, 10.1.62, 9.0.124. Users are recommended to switch to TLS 1.2 and PLDS-PSK or upgrade to version 11.0.30, 10.1.63 or 9.0.123 (when released), which fix the issue.
CVE-2026-77315 1 Flytohub 1 Flyto-core 2026-11-20 8.5 High
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, http.paginate in src/core/modules/atomic/http/paginate.py validates only the initial base_url, and _paginate_link_header then follows a server-supplied Link: rel="next" URL without calling the SSRF guard again. A low-privileged caller can make an allowed first page point the next request at an internal or metadata service, causing a readable second-order SSRF whose response body is aggregated into all_items and returned. This issue is fixed in version 2.26.8.
CVE-2026-121649 2 Apache, Apache Software Foundation 3 Apache Tomcat, Tomcat, Tomcat 2026-11-20 7.5 High
Use of cache containing sensitive information vulnerability in Apache Tomcat's ExpiresFilter caused by the filter removing cache-control header fields set by the authentication layer. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.0.M1 through 9.0.123. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.1 through 7.0.109. Older unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fix the issue. Note: Tomcat 11.0.28 was not released
CVE-2026-77314 1 Flytohub 1 Flyto-core 2026-11-20 6.3 Medium
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, the MCP run_recipe tool in src/core/mcp_handler.py accepts a caller-controlled recipe_name that load_recipe() in src/cli/recipe.py appends to the src/recipes path without resolved-path containment. Parent-directory segments can therefore make Flyto load and execute a YAML workflow outside the bundled recipe directory, bypassing the boundary represented by list_recipes(). This does not necessarily provide unrestricted code execution because available workflow modules remain subject to Flyto's module policy, but it permits unintended execution of allowed browser, network, file, and data-processing modules. This issue is fixed in version 2.26.8.
CVE-2026-77312 1 Flytohub 1 Flyto-core 2026-11-20 10 Critical
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, the earlier CVE-2026-67429 remediation applied validate_path_with_env_config() to only a hand-picked set of file-writing modules, leaving data.csv.write in src/core/modules/atomic/data/csv_write.py, data.json_to_csv in src/core/modules/atomic/data/json_to_csv.py, file.copy in src/core/modules/atomic/file/copy.py, and file.move in src/core/modules/atomic/file/move.py outside the FLYTO_SANDBOX_DIR confinement boundary. The advisory also identifies unguarded modules across the broader data.*, file.*, and report-writer families. data.csv.write relies on a .. substring denylist that does not reject absolute paths, while the other named modules accept caller-controlled output or destination paths without the canonical guard. A caller able to execute modules or recipes can therefore write attacker-controlled content outside the configured sandbox, potentially overwriting application code, recipes, startup files, scheduled-task files, or authorization files and gaining code execution on the host. This issue is fixed in version 2.26.8.
CVE-2026-133481 1 Dolibarr 2 Dolibarr Erp/crm, Dolibarr Erp\/crm 2026-11-20 4.3 Medium
In Dolibarr before 24.0.3, /api/index.php/eventattendees discloses attendee and project data regardless of the caller's permissions. Only 22.0.0 and later (where api_eventattendees.class.php exists) are affected. A remote authenticated user can obtain column values one character at a time.
CVE-2026-77313 1 Flytohub 1 Flyto-core 2026-11-20 7.1 High
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, validate_url_ssrf in src/core/utils.py resolves and checks a hostname but returns the hostname URL rather than the validated address, and session.get in http.get performs an independent DNS lookup when connecting. A low-privileged caller with control of the hostname's DNS can make the first lookup return a public address and the connection-time lookup return an internal address, bypassing the SSRF guard for all modules that call it and exposing readable internal or metadata-service responses. Successful exploitation requires attacker-controlled DNS and a successful timing-dependent answer change between the two lookups. This issue is fixed in version 2.26.8.
CVE-2026-77316 1 Flytohub 1 Flyto-core 2026-11-20 7.1 High
Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, validate_url_ssrf() in src/core/utils.py validates one DNS answer and then returns the hostname, while guarded_aiohttp_request(), enforce_outbound_url(), and validate_url_with_env_config() allow the outbound connection to perform an independent second lookup. A caller with control of the hostname's DNS can make validation see a public address and make the connection see an internal address, bypassing the guard across its outbound consumers and exposing readable internal or metadata-service responses. The attack requires low or zero DNS TTL behavior and a successful timing-dependent answer change; static multiple-address answers are checked and do not provide the same bypass. This issue is fixed in version 2.26.8.
CVE-2026-133435 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-20 3.7 Low
A flaw was found in Keycloak. When configured with a database that uses case-insensitive collation, Keycloak resolves realm URLs regardless of letter casing. A remote attacker can exploit this behavior by sending requests with alternate letter casing to bypass upstream reverse proxy access controls that rely on case-sensitive path matching. This issue can expose restricted authentication endpoints intended only for internal access, though Keycloak's internal authentication mechanisms remain intact.
CVE-2026-99606 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/smc: don't spin in smc_rx_recvmsg() while a pipe holds spliced data While bytes spliced off the RMB are still in a pipe, recvmsg() waits for the pipe to release them before it copies the data behind them. The path to that wait skips the timeout and signal checks, and smc_rx_wait() returns at once on RCV_SHUTDOWN. With a signal pending, after SHUT_RD, or once the peer closes or shuts down writing, recvmsg() spins on a CPU until the pipe is drained, and SIGKILL cannot stop it. MSG_DONTWAIT and an expired SO_RCVTIMEO wait there too instead of returning -EAGAIN. Check the timeout and signals before that wait, and end it when the pipe releases the data or the connection is killed, not on RCV_SHUTDOWN. A zero-length read returns 0 without waiting for the pipe; a non-blocking one returns -EAGAIN while poll() still reports the socket readable (splice() can still take those bytes). The wait sets SOCKWQ_ASYNC_WAITDATA like smc_rx_wait(), so a byte arriving behind the pipe raises no SIGIO on a reader already asleep for it, and a full barrier orders its wait queue entry before its read of splice_pending, so no wake is lost.
CVE-2026-99608 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.
CVE-2026-99615 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: l2tp: only return sessions of the given tunnel in l2tp_session_get() Commit 5f77c18ea556 ("l2tp: use IDR for all session lookups") made pppol2tp_connect() and the netlink session commands find sessions with l2tp_session_get(), passing the socket of the tunnel they name. L2TPv3 session IDs are unique per network namespace, except that sessions carried over UDP are only unique per UDP socket, the socket of their tunnel. However, l2tp_v3_session_get() only checks the socket when another session has the same session ID. Otherwise it returns the session, whichever tunnel it belongs to. As of now, a session command that names the wrong tunnel acts on a session of another tunnel, and a PPPoL2TP socket for a second L2TPv3 tunnel fails with EEXIST, because it finds session 0 of the first tunnel. The issue can be reproduced with: ip l2tp add tunnel tunnel_id 3 peer_tunnel_id 3 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5003 udp_dport 6003 ip l2tp add tunnel tunnel_id 4 peer_tunnel_id 4 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5004 udp_dport 6004 ip l2tp add session tunnel_id 3 session_id 7 peer_session_id 7 ip l2tp del session tunnel_id 4 session_id 7 ip l2tp show session Before that commit, the delete fails with "No such device", and session 7 of tunnel 3 is still listed. After that commit, the delete succeeds, and session 7 of tunnel 3 is gone. This patch will make l2tp_session_get() return NULL when the L2TPv3 session it finds does not belong to the given socket. The receive path calls l2tp_v3_session_get() directly and is not changed.
CVE-2026-99666 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]
CVE-2026-99671 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch.
CVE-2026-131737 2026-11-20 5.3 Medium
Missing Authorization vulnerability in Magepeople inc. Car Rental Manager car-rental-manager allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Car Rental Manager: from n/a through 1.5.7.
CVE-2026-79655 2 Red Hat, Redhat 9 Enterprise Linux, Enterprise Linux, Enterprise Linux Eus and 6 more 2026-11-20 7.8 High
A flaw was found in sos clean, a utility within the sos package. This vulnerability allows a local attacker to perform arbitrary file creation or overwrite. By crafting a malicious tar archive, an attacker can exploit a path traversal issue during tar extraction, where symlink and hardlink targets are not properly validated. This enables the attacker to write files to arbitrary locations on the system with the privileges of the sos clean process, which often runs as root.
CVE-2026-131744 2026-11-20 4.3 Medium
Missing Authorization vulnerability in Andy Moyle Church Admin church-admin allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Church Admin: from n/a through 5.1.11.