Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429899 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99589 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back.
CVE-2026-99590 1 Linux 2 Linux, Linux Kernel 2026-11-20 8.1 High
In the Linux kernel, the following vulnerability has been resolved: ceph: clamp the inline data length in ceph_fill_inline_data() The MDS decides how much inline data to attach to a reply, and the client parses inline_len without any upper bound: ceph_decode_need() only verifies that the message actually carries that many bytes. ceph_fill_inline_data() then copies the data into a single folio with no length check, so a malicious or buggy MDS returning more inline data than the folio can hold writes past its end. Clamp the length to folio_size() so both callers, handle_cap_grant() and fill_inode(), are covered.
CVE-2026-99591 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.5 High
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together.
CVE-2026-99592 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ]
CVE-2026-99593 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class.
CVE-2026-99596 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7
CVE-2026-99597 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: srcu: Add list_splice_init_srcu() list_splice_init_rcu() makes a list look empty to new readers, waits for the current ones with the given sync function, and only then links the entries into the new list. The sync function takes no argument, so it can wait for RCU readers but not for the readers of an srcu_struct. Passing synchronize_rcu() for a list read under SRCU still builds, but leaves SRCU readers on the entries while the last one's next pointer is moved onto the new list head. nvme_remove_namespaces() does this today. Add list_splice_init_srcu(), which waits for the readers of the given srcu_struct instead.
CVE-2026-99598 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: MIPS: sgi-ip32: Leave MACE PCI control alone in config accesses mace_pci_read_config() clears the master abort interrupt enable in the MACE PCI control register around each config read. A register read followed by two register writes can hang CRIME 1.1 under DMA load. Ack master aborts in the error register instead, and follow every write with a read so back-to-back accesses cannot form that sequence.
CVE-2026-99599 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: udf: don't use eloc after the end of the unallocated space table When udf_next_aext() returns 0, its eloc, elen and etype outputs hold no defined value. Two walks of the unallocated space table still use eloc after the walk has reached the end of the table. udf_table_prealloc_blocks() looks for a free extent starting at first_block and decides whether it found one by comparing eloc with first_block after the walk. If the table's list ends in a continuation descriptor that leads to an empty allocation extent, eloc is then the block of that allocation extent, which is in use, and if that is first_block, the block is handed out as preallocation. Once udf_discard_prealloc() no longer frees the wrong block, this is what still makes fsx in generic/091 and generic/263 read back bad data on a table, in about one run in four. Only take the extent if the walk stopped at it. When udf_table_free_blocks() cannot merge the freed blocks into an existing extent, it appends a new one and sets only its block number, so the partition reference comes from whatever eloc held after the walk, and with long allocation descriptors it is written to disk. For a table without extents, eloc was never set. Take the partition reference from the freed blocks instead. Short allocation descriptors do not store the partition reference, which is why this half remains a latent long-descriptor fix rather than a reproduced failure.
CVE-2026-99600 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1.
CVE-2026-99601 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: udf: check the unallocated space table when it is loaded udf_table_new_block() hands out the first block of the extent closest to its goal and trusts that the extent covers at least one whole block inside the partition. Nothing checks that. A zero-length extent makes it return the block the extent points at, which need not be free, and the subtraction of one block then underflows the length into the type bits, turning the entry into a bogus continuation. An extent running past the end of the partition makes it return blocks behind the partition. Such tables are not only found on crafted images: until the previous commit, udf_table_new_block() itself left zero-length extents behind in tables written by mkudffs, and then converted them into extents running past the partition. Check every extent once when the table is loaded, and refuse read-write access if one is empty, is not a whole number of blocks, or does not lie inside the partition, in the same way as for other allocation information the kernel cannot use. Check first that the table is an Unallocated Space Entry at all: the walk starts at the offset of the allocation descriptors in one, and for a file entry that offset lies before the inode's in-memory copy of the descriptors. Treat a chain of allocation extent descriptors that leads back to itself the same way: the walk would otherwise return the same extents forever, and the mount would never finish. Let a fatal signal interrupt the walk and fail the mount. Refusing read-write access to an empty extent is deliberate. It shows that an old kernel took the last block but left the entry behind. If consumed again, the entry returns an in-use block and turns into a huge bogus extent. Refusing the table before that happens avoids this second allocation; the filesystem can still be mounted read-only. The check cannot detect every overlap that may already exist in a damaged table. This patch should be backported together with the previous one: that patch stops creating new empty extents, and this one rejects existing ones before they are consumed again.
CVE-2026-99602 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: udf: don't let the extent type hide an exhausted free-space table extent udf_table_new_block() takes the first block of the free-space table extent closest to the goal. It keeps that extent's type and length together in goal_elen, subtracts one block, and deletes the extent only if goal_elen then reaches zero. UDF 2.60 section 2.3.7.1 requires the free-space extents of an Unallocated Space Entry to be of type 1 (allocated but not recorded), and mkudffs writes them that way. For such an extent the type bits keep goal_elen non-zero, so taking its last block leaves a type-1 extent of length zero behind, starting at the block after the extent, which is in use. The next allocation that picks this empty extent returns that in-use block. Subtracting a block from 0x40000000 then borrows from the type bits, and the extent becomes type 0 with a length of 2^30 - blocksize: about a gigabyte of "free" space overlapping live metadata, the other table extents and whatever lies behind the partition. From then on blocks are handed out twice, or past the end of the partition. Extents that udf_table_free_blocks() adds are type 0, where the check works, so only tables written by mkudffs or by another implementation are affected. Nothing more than filling such a filesystem is needed: on a fresh 1 MiB "mkudffs --space=unalloctable" image, creating empty files until the partition is full writes file entries over the reserve volume descriptor sequence and the backup anchor, and df then reports a negative amount of used space. On syzbot's images the same double allocation is what the two reports below trip over. In the first, ftruncate() extends a new file with enough hole extents to need a chain of allocation extent descriptors; one AED is placed on another inode's file entry, and a later one is placed on the block of the AED currently being filled, which udf_setup_indirect_aext() zeroes, so __udf_add_aext() finds lengthAllocDescs out of step with its cursor. In the second, an AED is placed past the end of the device, sb_getblk() fails, and the error path of udf_do_extend_file() calls udf_truncate_extents() on an extent list that no longer covers i_size. Keep the type separately from the length, as udf_table_prealloc_blocks() already does.
CVE-2026-99603 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: use RCU to free endpoint listeners mptcp_pm_nl_create_listen_socket() starts the TCP listener directly instead of going through mptcp_listen(). It consequently misses setting SOCK_RCU_FREE on the parent MPTCP socket. tcp_child_process() can invoke the listener's subflow_data_ready() callback without holding the MPTCP parent lock or a reference to the parent. An authenticated MP_JOIN racing with endpoint teardown can therefore access the parent after its last reference has been dropped. The ADD_ADDR error path can also close an already published listener. Set SOCK_RCU_FREE before __inet_listen_sk() publishes the TCP listener, matching mptcp_listen(). This protects the parent on every subsequent close path, including a failed endpoint addition.
CVE-2026-99605 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Fix NULL dereference on unbind without PPU flop reset flop_reset_data_ppu is only allocated on GPUs that need the PPU flop reset. However, etnaviv_unbind(..) frees it unconditionally, and etnaviv_cmdbuf_free(..) dereferences cmdbuf->suballoc before checking whether cmdbuf is NULL. As a result, unloading the driver on GPUs that do not need the PPU flop reset causes a NULL pointer dereference at address 0.
CVE-2026-99607 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ext2: preserve IOMAP_F_DIRTY for extending direct writes ext2_iomap_begin() sets IOMAP_F_DIRTY for writes that may extend i_size, but clears the flag after ext2_get_blocks(). When the write uses an existing mapped block, iomap can then use FUA and skip generic_write_sync(), even though ext2_dio_write_end_io() updates the inode size. An O_DSYNC write can therefore return without persisting the new size. For example, on a FUA-capable device, a 512-byte O_DIRECT|O_DSYNC write at offset 512 into a fsynced one-byte file returns successfully and extends the in-memory size to 1024, while an immediate read of the on-disk inode still shows size 1. An explicit fsync persists the new size. Move setting of IOMAP_F_DIRTY after the initialization.
CVE-2026-99609 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Require a buffer of two URBs usx2y_urb_capt_retire() wraps the ring buffer once per packet and usx2y_urb_play_prepare() once per URB of nr_of_packs() packets of up to 50 frames. Both assume that the data fits in the buffer, and the hw constraints only require about two 1 ms periods, so a packet larger than the buffer on capture, or a URB larger than the buffer on playback, violates that assumption. Constrain SNDRV_PCM_HW_PARAM_BUFFER_SIZE in snd_usx2y_pcm_open() to at least two URBs, 2 * nr_of_packs() * 50 frames, for both directions. The bound is in frames and derived from the driver's own packet limit, so it does not read the endpoint, whose altsetting is only selected in prepare. Two URBs rather than one, because the position advances by a URB on playback and only moves when a URB is less than the whole buffer. Keep a guard in usx2y_urb_capt_retire() that drops a packet larger than the buffer, for the case the constraint makes unreachable. With nrpacks above about 163 (S16_LE) or 109 (S24_3LE) the bound exceeds the 64 KiB buffer the substream preallocates (twice that with the preallocation raised to its 128 KiB maximum), so hw_params fails for those module settings. That is intended: the driver cannot be safe with a URB larger than half the largest buffer. Reproduced on 7.3-rc7 with a USB/IP device presenting the US-122 interface layout and 1024-byte packets into a 512-byte capture buffer: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x1285/0x1ac0 Read of size 18446744073709551104 at addr ffff88800e448800 by task vhci_rx/83 Tested on 7.3-rc7 with the same device, S16_LE at 44100 Hz, nrpacks 4, so the bound is 400 frames. A 128-frame capture buffer and a 200-frame playback buffer are refused at hw_params with EINVAL. A 400-frame buffer streams for 30 s in each direction with the position advancing inside the buffer and no KASAN report; the capture guard did not fire. The same 400-frame capture buffer with S24_3LE, which selects altsetting 2 in prepare, streams for 30 s with the same result.
CVE-2026-99611 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Reject capture buffers smaller than two packets line6_capture_copy() splits the copy into the ALSA ring buffer once at the buffer end and wraps pos_done once, which is only correct when one packet holds at most buffer_size frames. The packet size comes from the device's endpoint, and the per-device hw structs allow 64-byte periods with periods_min 1, so a packet can be larger than the whole buffer. audio_in_callback() logs an oversized packet and then copies it anyway. The packet size is known at probe time, so constrain SNDRV_PCM_HW_PARAM_BUFFER_BYTES in snd_line6_capture_open() to at least twice the larger of the two endpoints' packet sizes. Two rather than one, because pos_done advances by the packet and wraps once, so a buffer of exactly one packet leaves the position unchanged after every packet. hw_params then rejects a buffer that cannot hold two packets, and the single wrap is valid for every configuration that gets through. Keep a guard in line6_capture_copy() that drops an oversized packet with a ratelimited error, for the case that should no longer be reachable. Reproduced on 7.3-rc7 with a USB/IP device presenting the GuitarPort interface layout and 1024-byte packets into a 128-byte buffer: ALSA logged "invalid position: pos = 224, buffer size = 32" and the driver logged "driver bug: len" on every following packet. With this patch a 1024-byte buffer is refused at hw_params, and a 2048-byte buffer streams for 30 s with no report and with the position moving inside the buffer.
CVE-2026-99612 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/tas2781: Only accept CRC-less V1 data if all entries are valid Commit 408249089c48 ("ALSA: hda/tas2781: Accept V1 calibration data without CRC") only checked the first device entry. On machines where the BIOS populates fewer entries than p->ndev, the remaining all-zero entries are applied and tas2781_cali_preproc() divides by zero on playback open. Accept CRC-less V1 data only if every expected entry is non-zero and self-consistent (R0 * 1/R0 close to 1.0), otherwise reject it as before.
CVE-2026-99613 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: cs46xx: Handle SCB creation failures before dereferencing With CONFIG_PM_SLEEP enabled, cs46xx_dsp_create_scb() can return NULL if kmemdup() fails to allocate the SCB data saved for resume. cs46xx_dsp_scb_and_task_init() and _dsp_create_generic_scb() dereference the returned pointer without checking it, causing a NULL pointer dereference on allocation failure. Check both return values before accessing the SCB descriptors. Return -ENOMEM when creating the null SCB fails and propagate NULL from _dsp_create_generic_scb(). Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.
CVE-2026-99614 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvkm: clear use.enabled when subdev init fails On Kepler boards without the video decode falcon firmware installed (msvld/mspdec/msppp), every other VA-API decode attempt binds to an engine with no ucode loaded. The submitted work never completes, which leads to a context switch timeout, a channel recovery that cannot reset the engine, and eviction waits on fences that never signal. The process ends up stuck in D state, or killed by SIGBUS when it touches a buffer evicted after the wait times out: msvld: unable to load firmware data msvld: init failed, -19 fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] vo[5444]: channel 14 killed! WARNING: drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:117 at nvkm_runl_rc+0x2a4/0x3b0 [nouveau] [TTM] Buffer eviction failed WARNING: drivers/gpu/drm/nouveau/nouveau_bo.c:1092 at nouveau_bo_move_ntfy.part.0+0x9b/0x100 [nouveau] Tracing nvkm_subdev_ref() and nvkm_subdev_init_() shows the pattern: a reference taken with enabled=0 runs nvkm_falcon_init(), which returns -ENODEV; the next reference sees enabled=1 and succeeds without running it. Clear use.enabled when init() fails, so that every later reference retries init and fails cleanly. The other readers of use.enabled are fini() handlers that use it to skip teardown, which they now also do after a failed init(). On a GK107 (Quadro K1100M) without video firmware, playing H.264 with mpv --hwdec=auto: without this patch the GPU channel is killed within a minute and mpv hangs; with it, VA-API decoder creation fails, mpv falls back to software decoding, and no faults are logged.